ZMANALEX

Wheels and tyres ? Pictures please.

Probably normal but best to put 999 on fast dial just in case. Alex.

Plenty pre-owned sensors in stock for P1031. Just drop me a pm if I can help further. Alex.

What year and model is your car ? Facelift or pre facelift etc. ? Should have most parts in stock and I am only in Perth. Alex.

Bargain.

Well, that makes a huge difference and that will probably be your issue

The 1.2 turbo is worth considering, I drove all variants around 2 weeks ago and was very impressed with the 1.2, however settled on the 1.5. Alex.

For road use, 1 x psi would make no difference, it is all in the head. Best to run at 35psi all round if you are running decent 18" tyres. Alex.

You will have to check it out to establish what part has failed or if it is simply a bad connection. I have pre-owned OEM genuine Nissan full kits, looms and sensors in stock. Just drop me a PM if I can help further. Alex.

Plenty low mileage 350Z springs in stock as well. Just drop me a PM if I can help further. Alex.

Nice one mate: I have a full pre-owned OEM Genuine Nissan set (complete kit) I also have sensors in stock in various colours. Just drop me a PM if I can help further. Alex. Sorry to hijack this Alex, is there a common fault with these, mine stopped working last year and are the original ones, just wondered if there's an easy fix for them? Obv I'm not saying there's anything wrong with the Nissan ones, they've been on the car for 9 years. Just wondered if there's something I can check that will be an easy fix? Have your rev, sensors failed completely or is it just a single sensor failure ?

You do not require a ball joint splitter for the front ball joints because the alloy arms have cones fitted to the ball joint. Alex.

Ditto: noticed some of my recent PMs have "disappeared". Alex.

Nice one mate: I have a full pre-owned OEM Genuine Nissan set (complete kit) I also have sensors in stock in various colours. Just drop me a PM if I can help further. Alex.

I have a set in great shape which are off an 04 Skyline G35 Sedan. Drop me a pm if I can help further. Alex.

to the forum.

to the forum.

Nice one Flex. Pre owned VQ35DE crankshafts in stock and good to go same/next day. Just drop me a PM if I can help you further. Alex.

Plenty in stock just drop me a pm if I can help further. Alex.

Probably means flexy joint on "Y" pipe. Either fix or replace. Not difficult or expensive. Alex.

All the answers are in this topic and as the OP was effected by DTV then I would suspect that you have similar issues and the only fix is a good clean up and fit new pads and rotors. Have a read through all the previous posts in this thread. to get an idea of this issue. Alex.

to the forum Richard, glad you eventually made it along.

Just checked mine and running 4.4.4.

All parts are in stock, just drop me a pm if I can help further. Alex.

The Eibach springs will only drop you 30 mm and you may find that there is just enough adjustment on the rear OEM snail cam camber and toe adjusters to dial your geo. back to within factory tolerances. Alex.