dcash5

Pm'd

What is RRP on these alex

Bump - Go make me a daft offer!!!

These seem quite expensive, I picked up a full set for 400 about 6 months ago

Hammer!

Post the Pic

- what I woke up to!

http://www.350z-uk.com/forum/viewtopic.php?t=16851

Just for referance http://www.350z-uk.com/forum/viewtopic ... highlight=, but then again I didnt have the lights die on me. Sounds like a more serious fuse. Other route to try is check the fuseable links on the Battery clamp there are 4 in total all in pespects covers

yeah, you have to remove a few of the plastic tat

There are two fuse boxes in the enginebay, One behind the battery aswell

Two fuses for the Bose, One in interior and one in exterior, Check both

+1 set of clamps and an old brake pad

Basically the 350z stock design is Mastercylinder - Hardline - Flexi - flexi - Hardline - Caliper. The Old HEL/Goodridge was MasterCylinder - Hardline - Braided flexi - hardline - caliper, (I.e it changes two flexi hoses to one) but still retains the hardline from the caliper. The new HEL design goes Master Cylinder - hardline - Braided Flexi - Caliper The advantages are, Alot lighter, not only do you remove the spagetti of rubber flexi hoses but also the metal bracket aswell. Alot Easier to fit. Less points of potential failure (Less joints) (Five joints changed to Two) And this is without all the benfits of braided lines - Ha ha I sound like a salesman!

According to multiple papers Mr Branson responded personally! http://www.metro.co.uk/news/article.htm ... page_id=34

Be very careful not to let air get in the master cylinder by letting the reservior drain empty cos that is a B!@tch to get all the air out But as long as you take your time it will be fine. You need some 6mm clear tube from b&q and the bleed nipples are 11mm, be gentle with these I have heard stories of them snapping off! And I dont agree with that order, I did it in furthest from the master cylinder. ZMAN should be along shortly

Very very amusing http://blogs.creativeloafing.com/dailyl ... hing-ever/

Are these from Tim Vine - Youtube him if you dont know who he is

Depends how your going to be doing it. Pressure bleeding/ 2 person bleeding or vaccum bleeding? Pressure bleeding you obviously need a pressure bleeder, I got one from Adam at z1auto. awesome bit of kit! Vaccum - I have never attempted as i dont like the idea of this! And 2 person bleeding. No special tools required. Just a mate and plenty of time to do it properly

that is only just over 10k a year, average car use is about 12k. Might aswell use a car if you own it

Depends what fitting end fitting you get. If they are like mine in the pic, yes you should have 4 banjo bolts. Rgds Dan

I have managed to sort out a deal - if you mention my name (Dan) (or the club) Ben will do them for £65 quid delivered!!! :yahoo: Obviously this is the price he has quoted me now and if you are reading this in the future the price may have changed. this is approx £35 quid less than the goodridge. Apologies admin if you need to modify this post to stay with offical proceedure feel more than welcome!

Hi Guys As some of you know I have been slowly been collecting the parts to do a brembo conversion on my car. Anyway when it came to the brake lines i was baffled as to how Nissan had designed it, three hoses (2 flexy in a W shape and a piece of hardline). So i went down the braided lines route... Again this didnt seem much better, technically there are braided but still have the multiple point of failure in the joints and painfully heavy. This is where I did some research on what other lines people are using around the world and worked with Ben from hose solutions to develop a new kit. The kit we came up with bolts directly into the caliper with a banjo bolt and links straight to the hardline, much like 90% of the cars on the road! Here is the Kit And it fitted ... On every car I have owned, braided lines have made a noticable difference they reduced the mushy feel you get and provide a more direct impression when you hit the anchors. I love this mod and Im thoroughly impressed! www.hosesolutions.org.uk 01392 811601 Speak to Ben and say Dan sent you, no doubt he'll sort you out a deal!

Nope not on my JDM, you sure your not looking at outside temp? On my 350 I have ... Speed Outside temp DTE Average Mpg (KpL) Trip Distance And I think the UKer have a clock (Which is crazy in my opinion!)

Just do it yourself, everything on my car I have done (apart from bodywork) and the satisfaction is immense