3FIDDYZ

As has Andy Kudos, Markie Mark and a few others. I have a GM one but its covered by Carbon Fibre now!

Size?

Run Decats if you can, but either Berks or Kinetix will show a difference.

Fitted a kenwood camera not so long ago but keep forgetting its there! Linked to a reverse sensor in the boot!

Nice one colin, you beat me too that one!!! Sat in that car at crawley down a few times but unfortunatly they wernt able to do a deal on my car cause it wasnt stock!! Lovely colour Gonna have to wait for a red one now!

There are a few APS kits around, Speak to Mark @ Abbey about the cost of fitting, as they have fitted a couple and look after a few more. Supercharging is more cost efective as its less of an engine out job... But you have the issue that once you have found that extra 100hp your still looking for the next lot! They do say 500bhp is when you stop looking for more!

Search is your friend mate! Kinetix is a manufacturer of car parts and they make a spacer.

Just had this happen, was warn belts, replaced and now no more noise. Get a torch and see if your belts are cracked?

Few people that do run them. Your better off replacing the y-pipe at the same time just to free things up. Think Mark at abbey is promotion of highflows and decats and a change of y-pipe to give you better performance and a change of engine note....

Just used 6.5" kickers on mine, good valuse for money upgrade. BTW OT, you running your takaktas on your sparco harness bar yet? Just wondering if you either wanted to get rid or if I could borrow to get some measurements!

There are only one or 2 Japanese companus that make Carbon mirror covers for the Zed, but the ones that were sold via Delsea Motorsports were fine and a good fit. Check out the Carbing Craft ones, pretty much the same as the old delsea ones but they are made in China. Front lips are a bit weird as even some of the expensive ones are badly fitting, I used to run the veilside lip and that was a tight fit on mone but fitted well on the centre section. When it went onto Johns car it was a much nicer fit. Some of the centre sections are a shocking fit and if you have a lighter car its worth painting the center black first before fitting. Got to say, if I hadnt have gone with a body kit then I would have been going with the mastergrade / top secret option. Few options on the rear strut cover but having it carbon wrapped is another option... Mirrors Mirrors and Nissan centre lip Veilside lip Custom carbon wrapped strut cover

I agree. The k2 and scorpian sound similar and with a y pipe and hi flows will sound even better. But the nismos can be sold for a good price. You are having a laugh arnt you?!?!?! The K2 sounds absolutly nothing like a Nismo and even though the scorpian is a better zorst it sounds nothing like it either! Nismo under load is one of the best sounding zorsts out there. Scorpian is in here as a comparison There are a few more in here.. viewtopic.php?f=62&t=26655 And here! viewforum.php?f=62

Dont think so.... Have been keeping an eye out. Closest has been BlackiePauls 08 350z Nismo! You do have an issue that if your the 1st to bring one in you have a hell of alot of hassle to deal with at the SVA as they need to go through the car with a fine tooth comb and create a whole new record for it.. I know when Paul bought the Nismo in he had to go back and forth getting info from the land of the rising sun! Price is about 30 to 35k in Japan at the moment for the RS... RS-C your looking more like 150k IIRC. Just had a look and couldnt find any for sale! I have been looking!

Yep 380RS is a 3.8l engine but with lots of extras on the chasis. Supposed to be the best road going Zed ever made... You can also get a 380RS-C Out the box on the track!

Used to run them with no issue including MOT but am now decatted. Have a look in Abbey section for a thread called something like "day in the life" and you will see my before and after dyno sheets.

One assumes it was Max Power as they were running the compy that required you to send in a video

From what I understan there will be initial heats to get to the 36, but I dont know much more than that and what form these heats will take. Your crystal ball working well Liam? Why wouldnt you get through?!?! Its random!

4.8 inch screen? Go for one of the ones with a 7" screen there not much more! There is a how-to on here somewhere how to take them to bits and fit them in the cubby.. From experience there are some users that have had issues with these types of units...

Used the PIAA liquid to start with an its prety good stuff as it has silicone in to help the wipers. Good stuff for in the washer bottle. Only got Rainx as I won some! Used the rainx antifog wipes in the zed to some effect but now just keep the AC on all the time and dont get condensation! Did use them in a mates classic Merc to great effect.. Didnt seem to have any issue with anything left behind.. One tip for longevity of blades though... Dont use them to try and get rid of ice from the window! Turn you demist on and leave the car to warm for a while and then remove the ice with a cloth or gloved hands... Using them on iced windows acts like sandpaper on both the window and the wiper blade and distroys the blades very quickly..

200 chosen, 36 make it through, then there will be one winner.. Europe wide competition... I understand that Applicants will be chosen at random but the words that you put in your application will be looked at!

Yep, wipe the windows with the cloth provided and then a good coating of rain-x after you wash the car!

Tried them on the Zed for a year but have gone back to the PIAA's that envy sell as I do prefere them. 20" drivers 18" Pax 18" Rear (if you havnt removed to save weight, money and for a much cleaner look!)

Did you find that the seating position in the Gayman was a bit strange? I know in the coxter you point more towards the porsche badge and its not so apparent in the gayman but I did feel "off line" in there...

55 plate ran from Sept 2005 to April 2006 The plate is correct for the car. Similar to mine, registered in 2004 but a 53 plate (originally). Moi aussi !!