Jump to content

GIXXERUK

Ex Team Member
  • Posts

    9,450
  • Joined

  • Last visited

Everything posted by GIXXERUK

  1. He is riding a bike, what more do you need to know Sent from the golf club... Did you see Top Gear last night - we nearly managed to get shot of Clarkson! pfft Bmw ...half a job :drive1
  2. that looks very clean needs bigger wheels imo though
  3. GIXXERUK

    Golf R32

    They're NA man. I was just generalising Golf's (Sorry not just R32's) As my old 1.8T was all the above ^^ Untill the Turbo went at 166k Miles was it still under warranty i like the r32 but it's just not as fast as it should be out of the box, small hatchback with a big engine, my corrado vr6 felt quicker
  4. if it's on as tight as he says I wouldn't want to use the car as leverage, even under a cloth
  5. its comes in a set of 4 ( well the ones i have ) it's called a rolson pick and hook set (other makes available) they are actually used for removing washers and grommets
  6. plenty of advice on here if needed, just focus on a single job at a time and make sure you have all the tools needed before you start
  7. http://www.350z-uk.com/topic/82116-nissan-350z-gt-uk-spec-breaking/
  8. you can use this if you're careful and hook it inside in the corner of the badge, will def come off, there is a space between the badge and body that the 3m tape fills, go into that and pull after the hot water anything else risks damaging the paint work they are cheap to buy, ebay, b&q, halfords
  9. all in stock, ready to go same/next day delivery pm if i can help further
  10. you'll be fine, nothing complicated there and the gearbox diff aren't difficult
  11. Shoot me pm with payment details please, 370 btw :thumbs;
  12. Ah the lesser spotted rare 350z cc Top biscuits
  13. I can't see that taking the battery off will help as the alarm will/should have a back up battery Try turning the ultrasonics off to start with and check both windows are closing all the way
  14. Imo silver gives you a blank canvas and would look underwhelming even if you get silver, you need a contrast and I think red would look spot on
  15. I priced a 370z headlight from Nissan, was £1275 each ! (just incase it went Pete tong) Decided not bother
  16. I know this won't help but I bought from a variety of places, non off them affect the canbus and don't need to be error free, you're just paying extra for no reason Cree are very good but I've changed almost all bulbs to LEDs on my last 3 cars and not had a bulb fail The only bulbs I would be concerned about really would be anything that fits in the headlight or rear light as its a bit of a pain to get in there, the rest are a 2 min job to change The rear lights are a pain because most of the boot trim has be removed ( much easier on the 350z) Most affective are :- Number plate lights Interior lights Front side lights ( oem are yellow and don't suit the headlight) I also fitted the illuminated Z entry guards on the door sills, look great at night Hth Paul Oh yeah, then there's the reversing camera
  17. Isn't this the hydraulic tappets, they drain and it takes a second or so for them to fill and pressure up Obviously not helped by the longer a car is left standing and low oil The culprit of a noisy bearing is often the alternator, I certainly wouldn't be adding an oil additive on the description you gave Hth Paul
  18. It was pretty obvious imo although I have two mates who have dyslexia so maybe it's more apparent to me. So it's you're fault then
  19. Zeb you should have given a heads up about the dyslexia, people are understanding if they know the reason
  20. Yes 501 I've done the interior lights, side lights, number plate lights, boot light, vanity mirror lights and reverse lights on my 370 Non will give errors, the indicators require a resistor
×
×
  • Create New...