zelda

On Sunday I'll be fitting mine (I know it's been ages but I have a young daughter) and was wondering if there's a better guide to follow than this for installation: https://my350z.com/forum/engine-drivetrain-and-forced-induction-diy/418047-z1-plenum-spacer-install-how-to.html I'm sure I can do it without but it's always helpful to research beforehand, especially for torque settings and which side the gaskets etc. go.

Great results. When do you expect to do the rest of the internal work? Can you really feel that loss at the bottom?

Yeah, I'm the same. It was a bit of a change for me when I got my 350z.

That's pretty handy having the uprev map already then. Funnily enough I'm upgrading my diff some point this month to a Quaife.

Ha - well done that man. Been really interesting to read so far. What route are you taking with the ECU/remap?

Thanks guys. @ZMANALEX cost of a short replacement?

Thanks for the advice. And yeah, I should have known nothing is bolt on. Happened time and time again. Lol I just could do without the additional expense at the moment so I will probably try machining them and see how I get on.. doing LSD, clutch, flywheel, plenum spacer, airbox mod and lightened pulleys all together is racking up.

Is the Nissan short shaft something that I might have installed stock already? What's the price and delivery time?

Hi guys, I've just opened my new Quaife LSD and inside the box there's some instructions showing that the shafts need to be cut down. (Image attached) Anyone know if this 100% required for all 350z models? Mine's a UK 05 plate DE with a viscous LSD. Bit annoying if it is as this was supposed to be direct fitment. I thought that was the point of specifically selecting a replacement for the viscous unit. I guess though I won't know until it's all pulled apart. Also, I've got replacement seals, bearings and whiteline bushes but my kit didn't come with: 1 X Nissan OEM Inner "Back" Pinion Gear Bearing 1 X Nissan OEM Pinion Crush Sleeve 1 X Nissan OEM Outer "Front" Pinion Gear Bearing 1 X Nissan OEM Pinion Oil Seal Are these extras a requirement? E.g. likely to get damages upon removal. Thanks

Is that the same for the ones found in V8 range rovers? I was just looking at these for fun..

Maybe it wasn't installed correctly, using 'busters' mod?

1. Zero:One 2. Panman - Azure P44 AAN 3. Zelda 4.

Link is broken.

Fitting the cobra yourself?

That's what I said, and I held true to it for about a year. Give it time, you'll come round.

Any plans?

Welcome Stu. So me you and the other Dom all got zeds after our mr2s..

I have Teins also and can confirm what monkeybrain1234 has said.

I liked your original post, but am interested in case you didn't see it.

Fitting mine next month, let you know.

1. SuperStu - In for a large blue. 2. Jay84 - I'll take a black in large. 3. andy James - Large white please. 4. GeraldD - White XX2 5. GeraldD - Blue XX2 6. GeraldD - Black XX2 7. Rabbitstew - Large blue one for me too. 8. PPOD - White XL 9. Stephanie -Blue Medium 10. Matthew - large white please 11. Grumpyoldjanner - medium blue 12. Zelda - medium black

+1 for applying copper grease. I was in the same situation albeit with different pads and this did the trick.

Great service when ordering my Arbs and clutch line. Kept me informed all the way through.

Bought my bits from Clark Motorsport and got a local garage to do it.

Mines an 05' with 80k miles and there's no whine.