Jump to content

Nismoandy

Members
  • Posts

    301
  • Joined

  • Last visited

About Nismoandy

  • Birthday 31/03/1962

Location

  • Location
    pettswood, orpington, kent

Recent Profile Visitors

2,667 profile views

Nismoandy's Achievements

Z Dedicated

Z Dedicated (3/7)

417

Reputation

  1. A big shout out for Andy james thanks again for your organisation at this event
  2. Me too Andy it's a race against time before japfest hopefully I'll be there ,I'm working hard get it back on the road Saturday morning baring any problems
  3. Well small update have installed the clutch new pilot and thrust bearing just struggling to get the gearbox back in
  4. Well save me going on about these clutches i recommend that you watch the video! Very interesting .
  5. Time has passed with the car not being on the road, so I've done some investigation into a new clutch as the old one was a stiff sprung clutch and hardly any slip just on or off so not the most pleasant experience, so I'm going invest into a Uniclutch , these will fit both 350z and 370z they have a light pedal feel and a high capacity for torque , I'll pop a link so that you can see the difference between single and twin plate clutch plus other points
  6. Correct again, I took the gearbox out, and down to my local specialist helicoil s,e, London. They were very good they found the selector was in two gears, so they replaced selector fork and some bearings and cleaned. The cost was very reasonable under £400.
  7. You are correct no need for 6th gear but I had dropped off the car with him the night before and drove it to the m.o.t centre so ! What happened was, as he leaving the mot he came to far out into the road so he snatched reverse and missed it and found 6th hence the problem.
  8. Hi there everyone I've not been on the forum for a while as I've had car troubles . I did take the car out last year japfest and maybe one other meeting. I had to get the mot done so I took it to the normal chap who I've known for over twenty years ,so I dropped off the car and later on he gives me a ring stating that it's passed, the mot but it's stuck in 6th gear, what !. I was to say the least upset with the position I was in, so I parked up and left it for a few months and investigated the issues and was thinking about how to improve the clutch.
  9. 1. andy James. 1x club ticket Tracktime 09.40 2. Andy_Muxlow. 1 x club ticket. 3. Neil mcnab, 1 X club ticket Tracktime 15.40 4. Tauvp, 1 x club ticket 5. Defacake (Owen), 1 x club ticket 6. Blacklist_Nismo, 1 x club ticket 7. Clacksonator, 1 x club ticket 8. Buptaboy (Rob), 1 x Club Ticket 9. H44KRS 1x club ticket Tracktime 15.40 10. Tori370z x1 club ticket 11. HEADPHONES 1x club ticket 12. Berkcan 1x club ticket Tracktime 15.40 13. daveo132 (Dave) 1x Club ticket 14. nismoandy,1Culb ticket
  10. Not that I'm biased but I agree
  11. Usa based, Utube, 350z recommended to the masses
  12. I've just sat down and watched this, and I rate Johnny, as a great petrol head, it's just such a shame we won't get the new Z
  13. Hi fellas I have recently taken the 350z for it's annual MOT and it passed with flying colours as the mechanic was manoeuvring the car out of the garage he was putting the car into reverse and he selected 6th ,and now it's stuck in 6th gear. I've had car recovered home and I'm going to try and repair i think that the selector has worn and needs replacing, unfortunately this means gearbox out job . I'm afraid I may not be able to make Beaulieu , sorry . But I will try my best to sort out before
  14. Lovely looking car . Are the graphics on side to do with D C comics Marvel, etc, just wondering
×
×
  • Create New...