nissanman312

Couple of updates Attacking the gallery gaskets this weekend with @350Butcher I've been monitoring oil pressure which has been fine but decided to dive in and get them done for peace of mind as we're going back to the Dyno at Litchfield 😁 the supercharger has left for vortech today to have the si impeller installed which should net a little more boost without actually spinning the charger faster. While we're at the this point I'll be doing plugs coolant oil service etc etc to make sure it's a good as it can be before I get the map tweaked to suit the impeller Also on the list are the vibratecnics engine mounts The gearbox has been spot on so looking forward to getting those on I will take lots of pictures for you if anyone is interested

Can always count on me for half the info😂

Another nice little mod added and a couple of maintenance bits courtesy of Mr butcher @350Butcher So feeling 2nd to 3rd being a little bit awkward now and then @350Butcher suggested I try these https://us.gktech.com/z33-350z-z34-370z-solid-transmission-tripod-mounts-set-of-4 so he very kindly fitted them for me at the weekend along with the stiffer shift springs these guys do the result is a much sharper and more positive shift! a real nice little mod We also replaced the radio control panel as my volume had packed up. and swapped out the AC module as my AC has stopped working so thought it could be that. unfortunately that doesn't seem to be the problem so the AC fix needs further investigation. the clutch on the compressor isn't engaging but can only find a fuse and no relay for it. Next thing will be to check the power or lack of possibly to the AC compressor to be continued

💙

I nearly had had that but he said no offers and said it was going on eBay for 900 😅 Fair play mate lovely condition

Oooooo what are these new things I'm out the loop on this stuff lately

Aghhh gotcha No no spacers or any thing needed mate These calipers will fit under a 18 wheels yes As it's the Motorsport caliper it's very slim and not bulky at all for a caliper so big if that makes sense

How do you mean mate No shims had the bells made specifically for the car

Cheers Dave Yeah I'm well happy with them Unsure on if to keep my akebono calipers incase I ever sell up But if someone wants them I suppose they can go Hope you're well buddy

All fitted up big thanks to @350Butcher for his expertise once again He got to test them out first ofcourse. We weighed pads calipers and discs to find just shy of 6kg weight saving per side over stock set up . and with the anti rattle springs fitted along with pad retention clips they have perfect road manners for a Motorsport set up With the added stopping power and ability to perform over and over without getting to hot I'd say that's a win win situation of anyone fancys a set let me know I'm going to put a few kits together. 😁

Shustoke Dave ?

Brackets and bells arrived along with some PFC Z rated pads for the road so it's time to get them fitted up Fitted pictures to follow

I tagged a guy on your Facebook post who was very helpful with this and what parts he's used Give him a shout

I have a set I would sell Drop me a message

Nice to see these standing up to your uses I also have these and they have been great

Looks fantastic kev I saw a nice pillar pod from a company called Ortiz custom's for the right price if anyone's looking The guys also happy to help with the shipping and duty side

I have kinetix on mine I've put 30k miles on them no issues However will be swapping out to spl at some point. Spl isn't the best if you drive your car in all weather as they are all bearings without and protection from road grime But they are undoubtedly the best in terms of quality

I'll send you some pictures when I get the car out

I put a set of uniform holes in the bit that folds back under the number plate you can't even see them unless you get down on the floor and it let's loads more air in. I did this to allow air in to the top of the rad as my fmic blocks the lower half

Once they are on and working I'll let everyone know what it's cost Got a little wait for brackets and bells now

It's been a while but I've got a new mod ☺️ I did a track day a few months ago and the stock brakes although ok didn't really allow me to keep lapping so I've gone for a mega upgrade and one which I may make available to anyone else interested. It consists of the ap 5000r 6 pot caliper brackets and bells to suit either 350 or 370 and a set of used btcc j hook discs and pads all for less than a set of Chinese brakes . If anyone I'd interested keep following and I'll have more fitted pictures soon and prices tbc but for now here's a little sneak peak

If you do go custom have a chat with Craig his welding is spot on

Yeah lows are an issue and I'm really not much lower than stock on the kw . with a few bags and a passenger in Scotland I was kissing the floor a fair bit with the extra silencers I had put in to my invidia near the w brace When I build a motor I'm going to get criag at Dynotourqe to build me a nice custom system

Mega trip mate great to have you along The car was mega

That's true What's next