nissanman312

Still waiting on your S2k supercharger packages for my mate

Up for 5 seconds down for 5 and repeat sorted mine

Take the scenic route we did it was awesome Isn't that the one that's about 40 euro Aswell or am I thinking of another

+1 lift check fluids drop drive lol This is how I do mine!

Wish I was! my mate just landed a new job at a bank the wages are astronomical

This is going to be awsome

This was mine at around 630 this evening I'd been pushing her Aswell it goes up to 50 at very worst! and I mean 7000 revs each gear But comes straight back to this The car seems a lot more sprightly Aswell Obviously ignore that afr I was off throttle taking a screenshot for you guys

I think my loss on Litchfields dyno was 50/60 bhp

Is there anyway of doing a pressure test

No I haven't mark Why you want to do some loging

Do you have gauge mate

Right in my little drive tonight this is what I've found not fact just my observations from my obd reader On steady cruise when the car is up to temp I didn't see the intake temp drop below 43/50 degree On a steady cruise now it sits between 35/40 On hard excell before temps would instantly build anywhere as high as 60+ The point that Ian built my safe map and once I let off to drive steady it would take an age to come back to a resting point of 43/50 On hard excell now it seems to still get as high as 50 however as soon as you let off the power the temp seems to instantly sart dropping fast back to it's resting point of 35/40 If you sit in traffic and let it heat soak it will still reach upto 70 degree However the difference comes once you start moving ie the temps drop dramatically faster than before with the stillen kit I must stress I am now messuring this from the ecu which is reading from the manifold sensor that Ian fitted at the back of the manifold. as the stillen kit messures before its drawn threw the supercharger i believe and think mark will confirm that the gtm kit already dose this . The coolant temp seems to remain stable as this was a concern with such a big cooler in the main air flow And oil temps are between 90 and 110 with the cooler moved back in real hot weather or on track I bet it would exceed 110 if I find that I'll go with a bigger oil cooler I'm thinking of trying some mocool type stuff in the system but I'm warry of running to much stuff threw it and clogging it up Also to bear in mind I have a sibon vented bonnet so this could affect things for better or worse The only reson I perused the frozenboost was because Ian said temps we're reaching dangerous temps on the dyno so built a safe map at 60 degrees and the car switches back to power maps below this. and said if you do anything now make it beter cooling. So I'm hoping to stay out of that 60 degree mark The other thing Ian did was change my car onto to cloosed loop as in open loop if your temps have goten high and you floor the car in wide open throttle the car just assumes all is we'll when you could have very high charge temps ....again I believe this is a stillen kit issue rather than other set ups more so with the way the manifold heat soaks I belevie mark now has my Base map from Ian and can do all these things for you with ecutec as well can Litchfield I'm going for a big drive at the weekend with a club and it will be hard so I'll report back Oh yeah apparently ecutec had a lengthy convo with stillen about this issue and there conclusion was the surface area of the stillen manifold just isn't big enough My conclusion it's not perfect but it's better Again these are just my findings do think shoot the messenger

Thanks for clearing that one up As far as oil presure is concernd where should it be ?

That suffer? Or recall

I'll top mine up and let you know Mine is only just below max so must be very sensitive

If anything I think its possible play in the bushes so will perhaps look at renewing those possibly with white line ones That's cool I'll post it back could you pm me your address and I'll send it

Thanks for that mark Time to fit a pressure gauge then What sort of presure should you see if things are all good Also if the engine was suffering from low pressure would it give any indication engine light or anything?

Yeah it stays on tho Hopefully a top up will sort it Ill report back Thanks guys

No mate do you want me to send it back down If I never have to take that bumper of again it will be great Haven't had chance to drive it properly yet but seem temps are sitting more in the 30s than the 40s so I think it's had a positive effect Oil temps are up tho moving it back into the pecking order between 90 and 110 Engine coolant is staying stable at the moment which was one of my concerns with the frozenboost blocking a lot of air flow The one problem I now have the car is throwing up the traction slip light and its staying on when you pull hard I've done some reading and seems this could be related to the brake fluid being low as it also flashes the handbrake light so will top it up in the week and fingers crossed it will sort that

I check my level every time I drive bit did noticed I had used a bit in europe I shall keep a very close eye on this I think it would be beyond my capabilities to be fair

High guys I've had the bumper of today and installed the bigger cooler on the crash bar On hard excellaration the car is throwing up the traction slip light and it stays on My handbrake light also flashes and brake fluid is slightly below max hoping a top up sorts it but could the slip light be related Have I disturbed somthing???

Is this a big job I'm a little concerned as I've noticed my oil going down a bit

Halaluyah the frozen boost is in

Couple of shots from the rally