flyboy

looks great What size pack did you get ( How many sheets)

Not to worried about MOT if you get me. No seat/curtain/pax/ or wheel air bags anymore. So dash light just flashes away annoyingly lol.. Remove LED at Board level? Is that an easy job or dash out etc? Dash out, clocks dismantled. needles removed. pcb board exposed, led unsoldered or flicked off, Needles re attached and re calibrated while vehicle moving, re assemble clocks, re install dashboard. About 2 hours if you have taken it apart before about 3 to 4 if you havent. Look for gaugecraft website where they change the led colours in the dash for instructions on how to do it all.

ECU Reset gets rid of it.

Won't pass an MOT but it can be done by removing the LED at board level. No passenger airbag or side impact bags either?

Bit of a trip round to striding and I was on top of Helvellyn on Christmas day, Will probably be around Coniston somewhere as its on the right side for a shorter drive/longer walk. Dow Craig, Swirl how. Wetherlam, the man himself, etc depending on forecast

Sounds like one of the relays has gone on the board. I would take it out and see if it all behaves properly as stock.

Still available

Just had both mine done with an engine oil and filter change for £80. I supplied all fluids.

All pms replied to

I have had the unit changed on mine under recall but pulled the fuse anyway just in case it goes again. (For pulled - read replaced with a blown one) I call it an upgrade to the 2012 model spec (where they removed the steering lock)

People have fitted to jdm cars, Sometimes the wire colours are different but the plug positions are the same.

+1

Just asking but..... Do people use wheel spacers in high stress track use or are they all go and show. I know mine are just for stance and any track use will see them removed first.

Sounds great Mart. Flygirl and I will be walking in the mountains again on the Sat instead of the drive out, as its the only way i can get her there. Any seasoned walkers are welcome to join us but it will involve a stiff climb or two, maybe a small scramble and experience in the hills and wet weather gear will be necessary. If anyone is interested I will be able to sort out a route in advance.

Get a life and stop watching TV

They took loads of panels/trim off mine inc both a pillar covers and both b pillar covers,, scuttle trim. battery covers and surround, brake cover and surround etc. looked very naked without it all,

Ta!

It took 2 months to sell though with all the fittings and original nissan instructions.

Anyone know what front end this is please??

edit

I got £120 for mine a few weeks back on ebay.

Pm replied to Sam,

I have a supercharged Teknica K13 with the DIG S engine. Great fun when you keep your foot in and its returning 55mpg about town. (Official EU Combined economy of 65.7mpg) 97bhp @ 5,600rpm, 107lb ft @ 4,400rpm from a 1.2 When I think my 2.0l Opel Manta GTE had something like 107bhp things have moved on a tad.

£600 4 x flanges £5.00 each 2 X bits of tube £10 each 1/2 hour welding. £25. £545 profit