Adam B

Heated seat loom? Has your car got leather? Looking at position of loom it would go down gearbox tunnel. Havn`t found it in workshop manual yet, I`ll keep looking.

Hello and welcome. be aware, Zeditus is extremely contagious and this place is riddled with it. [ ps. I also have a roadster for sale .]

Japspeed decats here gathering dust. Only used for a few miles before I changed complete exhaust system. As new. Working nights though so you`ll have to be patient. Let me know.

Run the m2 in mine. They don`t sit that low at all, removed seat cushion to get right down in the car but need to modify rail to get it proper low

Likewise, if only I had the money. Great wheels, GLWS.

Figured there would be a snow photo before long Like it

Give or take a few miles. Just before black mountains really.

Freezing on the mountains this morning. Car loves the cold, oxegen rich air though [Got to get a decent camera, phone doesn`t compare to some of the shots on here] Hope you all had a good Christmas.

LoL, Too right. Glad its fixed , [oil in spark plug recesses is leaking rocker cover gaskets but that's a whole other expensive can `o worms]

I have to vote for clark motorsports xtreme, with the single mass flywheel. Hard launches all day long and engine response vastly improved. Slightly heavier pedal but that's probably because I`m getting old and weak. It is a few quid but you know what your willing to spend in the pursuit of speed. Lol

Ian - Caerphilly Sunset350z (Steve) - Aberdare Trev-The-Rev - Llantwit Major GixxerUK - Abergele xStric9x - Wrexham Premmitt (Paul) - Maesteg maestegman - church village Nik397 - Colwyn Bay ITSpecialist (Graham) - Pontypool/Cwmbran Miss 350Z - Haverfordwest (Pembs) nrenz123 (Nathan) - Port Talbot/Oxfordshire Chris - Rhondda (near porth) SimmySouth - Haverfordwest (Pembs) jonmacwales - port talbot DontPanic(Dave) - Swansea carl1978 - cardiff Rob - penmaenmawr,conwy Spaceman (Paul) - Mold (Nr Wrexham / Chester) Mei (Meirion) - Penperlleni/Pontypool steve - Newport Ledzed(Jon)-Pembs Geoff-R - Cardiff Ashey - Pembs Stanski - Part time taffy ChrisS - Dinmael - Nr. a triangle (OK who nocked me off the first list !!) r88er c (roger) - clytha near abergavenny JetSet (Pete) - Buckley, Flintshire cdbritten - Barry Remould - Swansea The MD - Swansea Notfub - Neath ioneabee - Narbeth Madhatter - Bridgend/Cardiff RoscoPervis - Swansea Lukejones - Rhyl SkylineV35-Cardiff welshboyo-tenby martin-newport Pocher-Deganwy zedmonster-Caerphilly GMballistic-Caerphilly ashtones (Jon)-Cardiff preex75 (Ian)-Porth, Rhondda iwanprice12-Crosshands, Llanelli aldo-Port Talbot 350zedd - Llandeilo Zedd - Llandeilo Crb - Blackwood JFinney21 (Josh) - Abergele Mike (modo) - Milford Haven garygranite - penclawdd gower Ozzy225 - Milford Haven, Pembrokeshire Adam B - Bridgend

Loving the look of that Z!! Tint front lights and that looks hard as nails. front bumpers giving me a GTR vibe, what is it? ps hope you sell springs.

Seats are available everywhere. Bride rails for recliners(base mounted) would be an obvious choice. Try one the traders on here (eg Tarmac) I`m sure they`ll advise you on options. I`ve only put a fixed back bucket in my z so unsure on which recliners fit best.

I laughed at it, yet I run a throttle controller. Still though.

Too right, excellent find. Plexi for glass and that's a nice weight loss for sensible money!

Of course, by a while I meant a few cycles of engine at idle. Should of been more specific. Bore wash is no fun. Never heard of freezer spray? Sounds useful. Fitting bearings/shafts etc and overheating coilpacks

What Rob332 said, if it runs on 5 again. Leave it run a while and then check your plugs. All should be revealed. Fresh MOT and out for a blast is good news.

I had exactly same symptoms as you said tom car became a pig. Ewan sorted me out with parts listed above. Engine also revs much more freely after getting rid of dual mass flywheel. [edit] well worth putting a new slave on, spring had snapped on mine, couldn't bleed. Car stuck on ramp 1day waiting for new one. Doh

Sounds like your no stranger to brembos, on the Zeds I`ve found they like the oem shims that are normally ditched. Last set of pads I ordered shims also (clark motorsport) No squealing since.

Nissan manual says to put windows down or do not open/close door during battery disconnect/change due to weird window thing. Possibility of breaking glass. [Little warning, just incase type thing ]

Crash? Hope its repairable and your alright

http://www.350z-uk.com/topic/105649-installation-guide-350z-de-d1-spec-gt-throttle-controller/ I would say just go through the setup procedure again, it should recalibrate as if new. Or is this sorted now?