UNABASHED

why not find out what the code is then you know for sure??

GOOD GOD MAN!!!! Edited for clarity!!!!!!!!! Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds. Repeat the following two procedures quickly five times within 5 seconds: Fully depress the accelerator pedal (HARD). Fully release the accelerator pedal. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. **at this point you need to count the CEL light flashes, think it starts by falshes 10 times slowly to indicate it is beginning then faster for the code. For example if it flashes 10 times slowly, 3 times fast, 2 times fast, 5 times fast 10 times slow then the code would be 325, then just match to the code list. Fully release the accelerator pedal (while the CEL is still blinking) Wait about 10 seconds. Fully depress the accelerator pedal and keep it for more than 10 seconds. Fully release the accelerator pedal (The CEL light will continue to blink). Turn ignition switch to OFF position and now you can start the car. The CEL light should be gone.

the bit that says there are 2 ways to get codes, either using a scan tool or by using the manual method

if you read the link it tells you how to read the code before resetting it, also has a list of the codes. No need for a OBDII reader in most cases

http://www.350z-tech.com/zwiki/ECU_Reset Confirm that accelerator pedal is fully released, turn ignition switch ON and wait 3 seconds. Repeat the following two procedures quickly five times within 5 seconds: Fully depress the accelerator pedal (HARD). Fully release the accelerator pedal. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. Fully release the accelerator pedal (while the CEL is still blinking) Wait about 10 seconds. Fully depress the accelerator pedal and keep it for more than 10 seconds. Fully release the accelerator pedal (The CEL light will continue to blink). Turn ignition switch to OFF position and now you can start the car. The CEL light should be gone.

Welcome

have you checked what code is being thrown up?

Can;t remember what sizes I got but the back very slightly does NOT cover the little holes behind it - does my head in when I look at it! hopefully will be remedied when I get the new rear bumper on

not sure about this one tbh. Try get some pictures up of the lights on for comparison, they do look a little too dark.

http://www.engadget.com/2010/07/07/audi ... chanics-p/ nice idea for those that can afford it!

must admit I only pay attention to news about car tax and threads about car tax when I know mine is due in the next few weeks

Well done - very cheap!

not any more! has the tax thing changed?

downloaded last night as well - might as well give it a bash!

perfect for rays, as the rears need the little eatra to suit the fronts

she doesn't like nothin it seems

thought as much, do I have to push it back in from behind the dash or from front? I only realised it was probably a button after I had got in and can;t go outside to check now

Welcome Very nice rex you have!

driving home from work today and something fell onto my foot, I am assuming this is a button that I don't use? If so, how do I go about refitting it?

yes i am this is my old one: brilliant little car looks like my first car, except mine wasn't anywhere near as powerful as that little 'rocket'

maybe he saw the pretty lady driving and was waving at her? either that, or you had just cut him up while you were putting lippy on and he was shaking his fist at you

have you tried looking under the couch cushions? Where did you last see them? Have a few drinks, get nice and relaxed and then call Nissan for a quote - then try keep calm.

my car came over through Bansai - still going strong Don't forget that if you bring one over now and register it here, then whatever age it is you will be paying premium raod tax!