BulletMagnet

Dib first, ask questions later

Not bad, all gone within two hours

Bought parts back from USA before.... My dad used to be a known guy up north, spent the last years of his life in Glasgow, used to hang out in Chinese restaurant next to a Chinese supermarket near Dundasvale Court Road.

Why buy from the states and get stung with import duty and have no guarantee if faulty?

You do know Zmanalex has/had BBK in stock ready to go? And Tarmac can get Stoptech BBKs

Remember that when ordering window switch part from the US, that they have left hand drive cars

Dibs on handbrake lever

UK, East Anglia

Dad is Hakka, mum from Fanling, I was born in Scotland, then raised in Germany Guess you like this then, haha http://youtu.be/W-gbS7DkZQ0

You canto then?

Front needs dropping

Decided to do something about this So I went and ordered these off eBay http://bit.ly/11JXhOe First I took the sun visor off it's mounting point and disconnected the power cable. Then carefully remove the light diffuser, pay close attention to the two tabs near the bulb as they can snap with too much force, also be careful with the mirror glass as it is not very thick. Then you should see this Replace candescent bulb with LED item Plug the wire in to test you put the LED bulb in the correct way When refitting the light diffuser take care again with the two tabs. I found it easier to work it in from one side to the other. And all back together Hope this helps anybody who is looking to do this

Stephen Chow Movies, and I don't just mean Kung Fu Hustle, but his earlier work, like God Of Cookery, which is basically a parody of the Chow Yun Fat movie God Of Gamblers

You'll need to remove the centre console plastics from top to bottom. Fairly straight forward, just remember to unplug the wire going to the triple gauges Open top cubby, remove the rubber mat at the front, revealing screws, remove screws, lift plate, remove more screws. Then pull and lift the bottom lip of the gear lever surround, be careful, but firm, it's only held in by clips. Once gear lever surround is off, you will be able to see the screws holding the bottom part of the centre console plastic. It also helps if you unscrew the white AC control box, just don't forget to plug the white flatband cable back in on reassembly.

Who knows, they may patch up the cracks and then spray it in the colour of their Zed....

cs2000 mentioned to my brother the other day how my Zed seemed to pull away faster than his Zed on the Pistonhead run last month. We both have 04 GTs, I have UpRev, cs2000 has not

Keyser would make 5 cooling panels out of that

Maybe they are selling this as the last ever made and therefore making it rare.........a rare piece of crap :lol:

I resemble that comment. You not a lady or have I got my geography messed up?

Put some u's in it and you'll have an Arrrrooouuusaaaaah, shame the vehicle doesn't quite reflect it tho, lol

When can we expect the part out thread? I know I'm gonna miss out on some lovely audio gear.....damn wedding

Google is surely the first port of call for everything? If it's not on Google it doesn't exist... fact! Just Google That $#!7

Good thing you don't work with me, them donuts I took to work would have been gone, lol 2x 6-pack of Custard filled donuts 2x 24 Chocolate Brownie Bites 2x 6 Cherry Bakewells 3 trays of assorted donut rings (12 each)

Found this diagram over at our american cousins and it seems that the amp signal wire is (G/Y), which I assume to be Green/Yellow? Failing that, you could always tap into ACC power

Ah, ok then Well, if it was myself, then yeah, the link to that speaker wire to RCA box thing looks like a good start. Since you are hooking up to a mono amp, then I would tap a positive from the right channel and a negative from the left channel, or vice versa to retain a mono quality to the sound was some songs do like a sweep from channel to channel and you don't want to loose the constant bass like it would happen if you only tapped into one speaker only. as for the remote amp switch wire, I do think the Bose Amp also uses a blue/white wire for this, but i'd have to double check and then you could tap into that for the signal. Looking at it now, it seems pretty straight forward.