Jump to content

All Activity

This stream auto-updates

  1. Today
  2. Congratulations on your new acquisition....... quite a rare find these GT4s. Your smile will be even bigger when the roads are warmer and dryer😉.
  3. While you are in there, make sure your push pull cable is not broken where it mounts to the latch. Check tension by manually triggering the latch release actuator and verify the micro switch under the latch is being depressed. If the cable piece where the tabs are is broken it will not have the proper tension to push the micro switch down.
  4. jamesd

    Sill parts

    Hi all Does anyone know places that sell sill repair panels. Need the rear piece from the door edge back to the arch both sides. Can only find full panels for crazy money.
  5. I swapped the stock steering wheel for a carbon fiber steering wheel from TTD Craft. The quality honestly exceeded my expectations — clean carbon weave, solid grip, and it fits perfectly with no issues during install. After driving with it for a bit, the wheel feels great, especially during spirited driving. It makes the interior feel more modern without changing the character of the car. I used a discount code ttdcraft03 when ordering, which helped a little on the price. Overall, I’m happy with the upgrade. Thought this might be useful for other 370Z owners considering a steering wheel swap.
  6. Hi everyone. My name is Al. Bought my first 350 a couple of months ago and I'm loving it. It's a 2005 GT4. Very unlike me, bought it through auction unseen not test driven. Was sweating like a pig bidding. I must be mad what am I doing and it was 200 mile away. It didn't disappoint when I collected. I had face ache from grinning all the way home. Couple of niggles to sort but nothing major. Think I'll be in touch with ZManAlex for a couple parts soon
  7. Chiming in here to stop people from spinning their wheels and to actually answer a question which seems impossible in the Z community after the Z32. Fifth bow motor will not activate in the situations listed above. you can manually move the fifth bow motor after the clicking is heard. The latch is disconnected. Use a 5mm Allen head on the motor under the plastic trim. Once the fifth bow motor is lifted, you can open the trunk and release the storage compartment latches and manually open the tonneau cover. inside the tonneau cover is your problem. There is the fifth bow release actuator, the fifth bow latch, and the fifth bow auto closing actuator. your latch release IS working. That is the click after the button releases. The next step of operation is for the system to check if the auto close actuator is open or closed. Your auto close actuator motor cable may be loose or mispositioned, flicking one of the micro switches on the latch and causing the operation to stop due to unexpected positioning. pull the assembly, clean the micro switches, disassemble the auto closure actuator, rewind the motor to fully retracted, grease cable. You should be able to spin the cable into and out the motor by hand now by using the tab. Reinstall the assembly. Make sure the latch is in RELEASED position. Make sure the piece that pulls the latch down is in the UP position. Connect the greased cable to the shortest possible length while still depressing the upper micro switch. You need to enter the vehicle and close the roof at this point. It should work.
  8. Yesterday
  9. Hi and welcome along buddy.
  10. I wish😄 https://youtube.com/shorts/5q5S2WWDS5A?si=nXj9Yx3YEe3WE_KP
  11. Last week
  12. Do like a yellow 350z 👌
  13. Looking beautfiul. have you washed yourself or you have hired someone.
  14. Thanks you for the welcome.
  15. Welcome to the OC
  16. Hi and welcome 😁
  17. to the forum William
  18. Hi, I’m William Jasper! I’m a car detailing and valeting expert with a strong passion for keeping cars looking their best. Over the years, I’ve learned a lot about cleaning, polishing, and maintaining cars to ensure they stay shiny and protected. I love sharing tips and tricks on how to take care of a car’s exterior and interior. I’m excited to be a part of this community to learn from others and also help out with any detailing questions or advice. Looking forward to connecting with fellow car enthusiasts!
  19. Could be numerous issues. Does the knock increase in line with increasing the revs? Is the oil level at maximum on the dipstick? How is your oil pressure? Sump pan oil leak is a cheap and easy fix, link is below. The oil on the gearbox will probably be oil getting blown back from your sump leak.
  20. Hi try Adrian at Torqen I know he was looking for one
  21. Saw a great looking yellow 350 with a private plate and rear spoiler in Linby/Hucknall today. Lovely sounding deep exhaust as well.
  22. 2016 Nismo 370Z catback exhaust 18k miles when taken off. good condition no damage or splits. £300 ONO collection only. located south of Sheffield 15 minutes from junction 29 M1 if traveling from the south. If traveling from the North 15 minutes from Meadowhall junction 34 or the same from junction 33. M1. Martin.
  23. stock VQ35HR head gasket
  24. Wish him well awesome pics etc. What head gasket is that?
  25. Hi mate I gave him a message but unfortunately he sold his one so I’m still on the hunt but thanks for your help
  26. Try contacting ZmanAlex on this forum, he can usually help.
  27. Cooling fan assembly with just x1 working fan. I removed this after I got my Z as one fan wasn't working. Free, collection only from M31 postcode. It'll go to the tip if nobody wants it.
  1. Load more activity
×
×
  • Create New...