The G Man Posted September 2, 2013 Posted September 2, 2013 First, and I've been told the last mod to go on the Nismo, courtesy of Redline Styling We'll see how long they last before some scrote has them away Quote
CrumbMC Posted September 2, 2013 Posted September 2, 2013 We'll see how long they last before some scrote has them away where do you live? Quote
Adrian@TORQEN Posted September 2, 2013 Posted September 2, 2013 (edited) It's a PITA to remove them once they stuck, had to cut the valve and replace it I then purchased these and use some grease on the thread http://cgi.ebay.co.u...ME:L:OU:GB:3160 Edit: Mine were Nismo from Tarmac, to be 100% accurate Edited September 2, 2013 by octet Quote
glrnet Posted September 2, 2013 Posted September 2, 2013 First, and I've been told the last mod to go on the Nismo, courtesy of Redline Styling Yeah, yeah Quote
4RE Leather Posted September 2, 2013 Posted September 2, 2013 It's a PITA to remove them once they stuck, had to cut the valve and replace it I then purchased these and use some grease on the thread http://cgi.ebay.co.u...ME:L:OU:GB:3160 Edit: Mine were Nismo from Tarmac, to be 100% accurate If you checked your tyre pressure on a regular basis they won't stick. Instead of waiting until the caliphers fall off after the tyres have exploded Quote
The G Man Posted September 2, 2013 Author Posted September 2, 2013 They're a quality, genuine Nissan part , put a film of copper grease on them, so's not to seize No devils Viki, but replacing the burgers with my Z badges off of the 370 Quote
Cragus Posted September 2, 2013 Posted September 2, 2013 I'll be down to half inch them tonight. Quote
M13KYF Posted September 3, 2013 Posted September 3, 2013 I hope you greased them as have been heard to rust on. Then it gets expensive to remove Quote
WhackyWill Posted September 3, 2013 Posted September 3, 2013 My Z style valve caps have lasted about 6 months and I live in "thieves" ally... (probably go out now and find them gone.. ) Quote
The G Man Posted September 3, 2013 Author Posted September 3, 2013 I hope you greased them as have been heard to rust on. Then it gets expensive to remove Yes buddy, put a small bead of copperslip on the valve threads Spacers next then George ? You're a very naughty boy 1 Quote
evilscorp Posted September 3, 2013 Posted September 3, 2013 Where are the other pics/thread? I am lazy and cannot find it within the 5mins I had spare Quote
The G Man Posted September 3, 2013 Author Posted September 3, 2013 Here you go http://www.350z-uk.com/topic/75618-took-delivery-of-this-bad-boy-and-bad-girl-today/ 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.