Dave172 Posted March 11, 2012 Posted March 11, 2012 i have just bought some new badges to replace the standard Nissan circle front and rear and don't no what is the best way to remove the old ones any one done this ? as i don't want to damage the paint Quote
introspect Posted March 11, 2012 Posted March 11, 2012 I used a hair dryer to heat the glue and a thin spatula to lift it off, worked a treat Quote
coldel Posted March 11, 2012 Posted March 11, 2012 Boiling water, get a sponge, sponge it on. Use some fishing line or dental floss, ease the badge off. Just keep putting the water on and wiggle the badge/use line and it will start to shift about and come away. Some white spirit then to shift the adhesive that is left over. Get some super resin polish (autoglym) and polish back the finish. Dry it all up and you are ready to go Quote
Zugara Posted March 11, 2012 Posted March 11, 2012 I just pulled them off, And the badges...... Quote
Dynamic Turtle Posted March 11, 2012 Posted March 11, 2012 Boiling water, get a sponge, sponge it on. Use some fishing line or dental floss, ease the badge off. Just keep putting the water on and wiggle the badge/use line and it will start to shift about and come away. Some white spirit then to shift the adhesive that is left over. Get some super resin polish (autoglym) and polish back the finish. Dry it all up and you are ready to go Blimey, sounds like a lot of work Quote
Dave172 Posted March 11, 2012 Author Posted March 11, 2012 thanks for that will have new z badges on my next day off Quote
ioneabee Posted March 11, 2012 Posted March 11, 2012 thanks for that will have new z badges on my next day off which badges did you get and from where - piccies are always good Quote
ianphampton Posted March 11, 2012 Posted March 11, 2012 I got mine off (from the boot) with Dental Floss - pull it gently underneath the badge and Hey! Presto! Quote
sasha@lazytrips Posted March 12, 2012 Posted March 12, 2012 You can use hairdryer/hot water/lots of scrubbing and it'll still look rubbish after an hour of trying to carefully get it off. Get yourself Autoglym tar remover - whole job done in 2 minutes with absolutely perfect results. Speaking from experience of 2 weeks ago. Quote
Dano190485 Posted March 12, 2012 Posted March 12, 2012 i put a hot water bottle in a pillow case and left it on the badges for half a hour and it just lifted off Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.