jimboy2 Posted December 22, 2015 Posted December 22, 2015 (edited) So unfortunately it's time to sell my pride and joy. The only reason I'm selling, is that my dream of owning an American muscle car has actually became a reality. This car has been an absolute dream to own. The only issue I have had with it was one of the compression arm bushing failed, which I had replaced with polyurethane parts. Description below. Standard Features 2008 silver HR 313 GT MOT until May 39k miles will rise only very slightly as it's my weekend car Alzean interior (small mark where one of them metal things on my jeans has rubbed it, hasn't teared the leather just marked) Bolsters have not collapsed like other cars. Bird view factory fitted sat nav General Condition Slight mark on passenger door mark on rear bumper scratch on interior door handle Everything else is in great condition. Wheels in great condition few slight marks always parked as far away as possible from anyone else and parked on a private driveway day and night only ever run on V power or Tesco 99 Service History P1 @ 7077 miles P2 @ 11190 miles P1 @ 12854 miles P3 @ 18484 miles P1 @ 28000 miles P3 @ 34095 miles its due a P1 service which i will get done at the end of Jan. if it sells before then i will knock the price of a P1 off. Performance Upgrades Cobra Resonated exhaust Berks HFC Motodyne XYZ y pipe HKS panel filters UpRev remapped to 319 ATF (by H-Dev) Full alignment (by H-Dev) Tein S-Tech lowering springs (lowers front by 17mm and rear by 14mm) Michelin Pilot super sports on all corners. Plenty of life left in all 4 Styling Upgrades (all easily removed) Rota 18†GTR alloys. Mines style front splitter (RT-Performance) Tarmac Sportz side steps Gloss black wrapped roof Carbon Fibre bonnet dampers JVC double din touch screen with Ipod connector and phone connection Stubby Ariel! (a must) New Z badges, front and rear (satin – same as standard 350z badge on boot) 20mm Eibach wheel spacers Red engine cover Fly boy wing mirror mod Carbon look slam panel In my opinion everything done to this car is what should be done to every zed. It's very subtle but sounds great. Everything is easy to remove and put back to standard which I will do if there isn't a lot of interest. i also have some of the original parts will be on here only until the end of January and i will then put it on to the other normal places. really hope it goes to a forum member as i will still lurk around and keep an eye on it. As it stands I would like £10,999 ** price drop for forum members £10,500*** PM me here are some recent pictures. will get some others and interior photos once the weather has cleared up a bit http://s1037.photobu...yffgb.jpg.html][/url] http://s1037.photobu...uod4c.jpg.html][/url] http://s1037.photobu...nqiii.jpg.html][/url] Edited January 19, 2016 by jimboy2 2
greg tl Posted December 22, 2015 Posted December 22, 2015 Nice car... Your number plate looks like Plonkerz!! Good luck with the sale. 1
Davectr Posted December 22, 2015 Posted December 22, 2015 Lovely Zed Jim, shame you have to sell it. GLWS. C'mon tho, what are you replacing it with, you can't leave us all hanging like that 😄
Bodyboarder81 Posted December 22, 2015 Posted December 22, 2015 Hi dude , sad you're selling but for a very good reason , the new car will be epic !! Glwts Seen this car in the metal and its lovely , also previous owner is a forum member also , so all is 100%
jimboy2 Posted December 30, 2015 Author Posted December 30, 2015 Thanks all. Didn't think I would be selling it already. you can all blame Grundy for putting the Mustang idea in my head!
The Big Miester Posted January 2, 2016 Posted January 2, 2016 Another great looking Zed there,best of luck finding a good home
jimboy2 Posted January 6, 2016 Author Posted January 6, 2016 Bump bumpy. Will be going on the usual sites next week. Really want a member to buy this
-G- Posted January 11, 2016 Posted January 11, 2016 Looks like a 380RS engine bay with that cowling. Where did you find that from?
Bodyboarder81 Posted January 11, 2016 Posted January 11, 2016 Looks like a 380RS engine bay with that cowling. Where did you find that from? From me .... I had it sprayed before i went FI . Swopped it for jims standard one as i never had use for it anyway .
-G- Posted January 11, 2016 Posted January 11, 2016 (edited) You can't tell from looking. Was wondering if he'd gotten it off a Japanese scrappie! Edited January 11, 2016 by -G-
jimboy2 Posted January 15, 2016 Author Posted January 15, 2016 Weekend bump On all the usual sites now
jimboy2 Posted January 19, 2016 Author Posted January 19, 2016 Adjusted price for forum members. Still same price else where
Recommended Posts