ZMANALEX

More than likely the fluid leak will be from the clutch slave cyl. which is fixed to the side of the gearbox. Usually there are no external visable signs of fluid loss as the fluid gathers inside the slave cyl. rubber boot. To establish if this is the case then just gently pull the boot to one side and the fluid will run out. Make sure that you are not directly below the slave when you do this. It has been known for the clutch master to eventually empty of fluid resulting in loss of clutch hydraulics. Cheers, Alex.

Got track events booked for 7/8 + 14/15 + 28/29 Should be free 21/22

Looks great mate, we were planning to go to the footy today but the game was called off due to the road conditions around Todders so we headed back to mine and got the gear loaded up and headed off to Glenshee, only to get to Blairgowrie and the boys in blue were not letting any one through. The road in from the top always appears to more accessible than from the bottom. Looks very quiet.

These are always being asked for. Another Sticky perhaps !!!!! Cheers, Alex.

Check out here. http://www.350z-uk.com/forum/viewtopic.php?t=19501 Cheers, Alex.

There are many recommended brake bed in procedures depending on the manufacturer. I have tried various recommened procedures and tried variations drawn on my own experiences. Below, in my opinion is one of the very best. Follow this and you wont go far wrong. Perhaps this could be a sticky............ Cheers, Alex.

Good luck with the sale mate. Remember >2006 LEDs available here. http://www.350z-uk.com/forum/viewtopic ... highlight= http://www.350z-uk.com/forum/viewtopic ... highlight=

Unfortunately they do not. Pirtek will manufacture pressure hoses for you if required. No it just seems a shame to have mechanics working on my car and not modding it at the same time. Cheers again Alex Ah! I get your drift now. Okay............. Pirtek will manufacture colour coded pressure hoses for you if required. But remember nobody will know that they are there, except you

Unfortunately they do not. Pirtek will manufacture pressure hoses for you if required.

You have pm.

Looking good mate

Result :yahoo:

VVT on inlet only. There should not be any rattles from the VVT.

Got these if any interest Got more somewhere so will have a look tomorrow. The marks on them are only reflections.

Adrian, Send me over your email addy and I will send over all the data that you need mate. Alex.

Steve, I am running with Eibach. 2 way adjustment on front. 3 way adjustment on rear. Alex.

Yes you will benefit greatly. Please read the link. http://www.z1auto.com/prodmore.asp?mode ... rodid=2886 Cheers, Alex.

Is that the OEM Nissan "carbon" finisher? They are crazy money for what they are. Sold mine to Lomoto for £25, dearlers wanted about 10x that! Yip, that is the one and like I said £250 new from the dealers.

Yes indeed, these are the ones that Adam at Z1 supplies http://www.z1auto.com/prodmore.asp?mode ... rodid=2886 If there is enough interest then I am sure that we can cut a deal with him. RRP $315.98

If there is enough interest in these then perhaps a group buy could be a good option. Notes of interest could be posted up by interested parties and then a decision will be made if it is viable. Cheers, Alex.

Will do mate, pics no problem. I am sure that the handling will improve if adjusted up properley and longevity will be a major factor.

Yeah, that will be a good test for them Steve.

As you all know the OEM sway bar drop links suck. They are noisy and wear out very quickly, especially if you have upgraded your sway bars and lowered your supension. Well help is at hand, and yes I know that they have been available for a while but I have just got my mitts on a set and they are a massive improvement over OEM. Because they are adjustable they can be set with "free" or no load, which gives you perfect ball joint alignment, something which was not possible with the OEM set up. I will be fitting them shortly and will report back after my 1st track day of 2009.

Any automatic transmision fluid or pas fluid will do the job and not cause any harm. The stuff that Nissan supply is generic and carries the following description and part number: AT-Matic D Fluid Incl. N-CVT KE908-99931

Matt, I may have one in the store, I will have a look tomoz and £50 sounds about right. What I definately do have is a Brand New Front Bumper Carbon Finisher which fits below the grill.....£110.00 delivered. These are also crazy money from the dealers at around £250.00 Cheers, Alex.