ZMANALEX

All in stock matey You have PM.

I have them PM on its way.

There will be no extra stress on the engine to worry about. Plenum spacers in stock and good to go same/next day. Alex.

Will try at some point over the weekend I am pretty sure that the squeak originates from a dry pivot for the clutch arm, next time i am under the car i will try and get some grease in there, as WD40 only works for a short time. Alex i think i will try a new braided clutch hose first to eliminate ballooning, do you sell a seal kit for the master cylinder rather than just throw more money at it by replacing the whole thing, having watched the slave cylinder in operation while bleeding the system i don't think that is at fault. Mwtech sells the braided lines got one myself there when I got the brake lines... Yes I do a seal kit which is priced at £22.38 + vat but the complete master cyl. is only £95.42 + vat. The seal kit though only consists of one seal, one piston and one spring. You will not be able to tell if the slave or master is faulty by just "looking" at the operation. My original post and pm advice still stands. Alex.

Good luck with Nissan mate but if they reject your claim then Exedy clutch kits are available here. viewtopic.php?f=38&t=27436 You have pm but good luck with Nissan. Alex.

Preowned gearboxes in stock and available for same /next day shipping. £500.00 + shipping Drop me a pm if I can help you further Alex.

Why do you say change all? i did change the fluid, not just bleed, there is an intermittent, pronounced squeak from what i am presuming is a dry clutch arm pivot also? Can you PM me some prices please Alex? PM on its way matey,

Change them all. Start with the slave and change the fluid at the same time. In stock and good to go same/next day. Alex.

Then go the Zunsport route .... much easier and 10 times more expensive

Yeah I like the look of that! But taking off my bumper and permanently cutting things off... I aint got the confidence to do that myself, I'll almost certainly bugger something up! Easy, Peasy mate, at least 160 other forum members have managed.

This will solve all your issues with no drama. Good to go same/next day. viewtopic.php?f=38&t=31534 Alex.

Sorry mate but Dave got the last one Ace: PM replied to mate.

1 x Roadster Cover and 1 x Coupe Cover in stock and good to go same/next day. Genuine Nissan, exactly as in Dave's picture. Drop me a PM if interseted.

It is quite normal to get some noises from the Z transmission but 1st gear should only be used when pulling away from a standing start. There is enough torque to use 2nd gear at low speed or low rpm.

You got a girlfriend Craig

I've got one.

Inefficient cat means that the cat is not working properly and will probably be an MOT failure if the emmissions are wrong. I have a couple of pairs of decats if you are interested, but they will not pass an MOT either

If the code is 430 then that points to a innefficient L/H cat. Replacing the cat should/may solve your problem. I have preowned OEM cats in stock available with new gaskets. Best to get a professional diagnoses carried out on Consult 2 to pin point your issue.

I would still pull the codes again.

430 is L/H cat. You would be best to pull the codes again as your fitment of the JWT P/C today may have triggerred a different fault with a different code.

Looking real good Dave Fits like a glove

I have got preowned front and rears in stock Craig. Alex.

I have these in stock Drop me a pm if I can help you further. Alex.

Intelligent Power Distribution Module

It doesn't.