ZMANALEX
-
Posts
14,825 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
You most certainly have not upset me mate. Also you deleted the pm you sent me before I got a chance to read it, so might be a plan to get your facts straight before you post up such rubbish comments on the open forum. Alex.
-
Strange clunk over bumps (even little ones)
ZMANALEX replied to craigmdennis's topic in 350Z General
Could be a number of things mate causing your knock, however I would start with checking out the compression arm ball joint and bush. Also have a look at the hub carrier lower ball joint. If you click on my signature picture, you will find all the parts that you may require. Alex. -
Jon, Best to get the correct wheels mate with the correct offset to avoid large spacers. I will reply to your pm shortly with some pictures Alex.
-
That is because I supplied them Yes, 18" mate.
-
Looking real Pete. Thank you for your custom mate, really appreciated. Alex.
-
Never seen a facelift JDM. Just to clerify, I did not say that the US headlamps would not fit, I said that they were not compatible with UK cars. Best not to go down the US route as you will be creating more issues than you have at present.
-
If you require replacement ARB drop links then here you go. viewtopic.php?f=157&t=48361 viewtopic.php?f=157&t=27406 Alex
-
Welcome to the forum Choice of CAI kits in stock + HKS and Cosworth Performance Panel Filters. Is your car a DE or HR ? Or single intakes or dual? Alex.
-
Stock + Performance Panel Filter or 06 box at £50.00 + Performance Panel Filter. If you are looking for an increase in noise and a downturn in power then aftermarket CAI is the way to go. Simples Alex.
-
Oil change and service kits in stock. Good to go same/next day: Drop me a pm if I can help you further.
-
15 mins in a tub of chemical will completely strip with ease. Quick hose down and quick gentle sand blast to provide key. Powdercoat and then in oven at 200 degrees. Sorted. Painting is a total waste of time and money. As Stew has said, powder coating is the only way to go.
-
Nissan Technical Service Bulletin.
-
Your model has the concentric slave set up so they are quite right in saying that the box has to be removed. There is a NSTB on this fault so best to remind your dealer of that. Common issue on both the early and later models. Alex.
-
my bank account won't look great empty Maybe so, however we will both still be happy.
-
One pump feeds both windscreen washer jets. Could be blocked or a pipe may have came off.
-
Looking good Adrian The Nismo V1 full kit will look great on your car mate. Alex.
-
In stock, brand new, £12.50 + delivery Alex
-
Thanks for clearing this issue up guys I did not think that you would have any issues fitting genuine parts supplied by the customer or from a reliable source. Guess Octet (Adrian) was just getting a bit confused due to the "stress" that he is under at the moment. Alex.
-
Hi James, DBA is middle ground mate, however they are a superb rotor and married up to a decent set of pads and you will experience trouble free motoring on your brake set up for many miles. In stock and good to go Drop me a pm if I can help you further Alex.
-
Nice one Stu. Bushes and arms in stock and good to go Matt. Just drop me a pm if I can help you further mate. viewtopic.php?f=157&t=43456 viewtopic.php?f=157&t=43455 viewtopic.php?f=157&t=43458 Alex
-
Best not to use a garage that has not got any experience with the 350Z. These boxes can be in and out in 2 hours to the experienced, however expect to pay 4 hours labour.
-
Then find some one else who is a bit more accomodating and who would be happy fitting Genuine Parts supplied by your self and warranting there workmanship.
-
You don't require there warranty on the parts mate as I have that well covered, however they have got to warrant there workmanship £200.00 max, is the going rate for the labour. Alex.
-
The Exedy clutch kit is not an uprated clutch and is what Nissan fit as standard. The £500.00 quote will not include a flywheel which you will probably require. The damage is done, so providing you do not step on the gas quickly then it should be okay to drive. Alex.
-
Agree with Mark. viewtopic.php?f=157&t=43466 Alex.