ZMANALEX

to the forum.

This was never going to happen.

Glad to hear that you are all sorted Ed and now knock free.

The collars are to help eliminate lateral movement and are usually a clamp design or grub screw. Alex.

to the forum.

to the forum.

to the forum.

to the forum.

The eBay listing posted is for a DE and not HR

You would be best with camber correction arms for the front and rear. You should get away with the rear toe bolts.

to the forum.

Fully working pre owned R/H and L/H in stock and good to go same/next day. Just drop me a PM if I can help further. Alex.

Surface must be flat and free of pebbles. Steel castors jam at the least obstacle, so heavy duty nylon or plastic is the way to go. Avoid rubber castors as they flat if left insitu for a period of time. The heavy duty mobile stands are the way to go. I use these and the dollies with great effect but only on a flat concrete surface for nearly a 2 ton car.

back to the forum.

Could well be a faulty cam position sensor which is on the rear of the cyl. head. Bank one is driver's side if RHD. Alex.

to the forum.

to the forum. COYR.

Have a look here. http://www.deskdesk.co.uk/

back to the forum Niki.

to the forum.

to the forum.

Nice one mate. Preowned units in stock complete with ribbon. Drop me a PM if I can help further. Alex.

to the forum.

Plenty genuine Nissan pre owned in stock for the Rays. Just drop me a PM if you have no luck on flea bay. Alex.

Thanks Will, I have a pair of pre owned DBA T3 front discs which were only on a 350Z for circa 500 miles. I may also have a set of rears. I also have a set of front and rear Nismo pads with shims which have very little wear and still got circa 10mm left. Drop me a PM if I can help further. Alex.