shire350Z

17's what the point in that could understand if they start at 17's but to finish at that size

most do mike and they use plastic shims to hold the base of the wheel its just when there fitting some of the larger tyres 295/30 etc the huge amounts of pressure needed same as on smallers one at times can cause the machine to pull onto the rim which also has a plastic shim, im just thinking of the worse and prob being over protective but it all helps

thought id get that reaction but does anyone know where i can get one?

and this is not in conjunction with nurrish's rim wax With time nearing to change my tyres im obviously nervous about the tyre fitters damaging the rim (which they assure me they wont but you can never gurantee 100%) and was speaking with a guy a while ago that said with most 'expensive' wheels and with some high end car makers i.e porsche, ferrari, etc they use a rim (wheel) guard which is just a plastic trim that fits over the rim to eliminate any chance of damage!! Just wondered if any of you guys with wheels had one or had used one before and if so where to get them from

so you'll be keeping the racing towing eye in there permanant and mounting to the back of that? aslong as the towing eye doesnt pertrude to far?

iv got bright white (which have a tint of blue in them) 501's in the rear number plate, front sidelights, interior boot and 2x 30mm festoon in the cabin and all look especially over the number plate

i regret in a way buying the first zed i came across also even though it was a great spec at a price i could afford at the time, i got every problem going skipping bose, left speaking cutting out, boot that wouldnt stay up, clicking rear axle, a clutch and flywheel that only lasted three months after gettin the zed and the paintwork was in a real bad way with the engine bay being disgusting but now she's a totally different Zed gone with all those problems way behind me and with a engine bay from this to this

mind he says liek new but looks abit shabby, ill have to measure mine and see whats out there on ebay

i could have nearly pm'd you mike thought ud be the first to reply cheers

Anybody know the best place to buy one from at the right money? had mine a couple of years ago now and its started to loose all the elastic in it, bought mine of ebay which lasted me well but after searching all i seem to come up with is this prat, sellin this garbage that wouldnt even fit in a 350 right, 'star buy' more like sh!t buy!! suppose any would fit if its the right size just wondered if any of you guys had found some good ones http://cgi.ebay.co.uk/NISSAN-350Z-CONVE ... 3a562e8657 http://cgi.ebay.co.uk/NIssan-350Z-03-on ... 3a55fb8cad

fancy buying some nismo's in august

that sucks i guess it's the price you pay for not having fully comp insurance... good luck getting your 350z (i don't even want to know what your premium on that is going to be!) shouldnt be anymore than normal id have thought as he didnt claim, and i bet a S200 is about the same money as a Z to insure! rooled it a few times ..................... surprised you werent badly hurt matey

TBH sasha with the amount of rays coming up for grabs and with yours needing new tyres all round and having damage on them that need repairing, id have thought you'd be looking at half of that figure sorry

just need to get some more of my special paint

really sorry to hear this matey after all the work youv not so long had done!! hopefully you'll get it sorted without to much hassle!!! let us know how you get on

i run the same tank and have never had a problem with it , but you'v tried everything i would so i tough one really

i might be selling my nismos for the right price mind but they aint black

thats where im mounting mine dont think im cutting it down though (the number plate) it will be only a thin strip that has to be removed for the plate to pass through with a deeper slot in the middle for the mechinism to pass through?? anyway know what the minimum legal width is of a UK plate? i take it its not much less than standard as the letters still have to be a still width apart! so with my number plate already having altered lettering i think if i go shrinking it to im just asking for trouble of the old bill

nice 1 mate cant wait to se it

one slight error there i have a gf called zoe but yeah quite the coincidence

cheers pal

take a look here buddy viewtopic.php?f=19&t=30793

very true and they have so much character as you can see by looking at jaggs its literally like another person being with you

I should have said I'd trawled that one, and the Silver threads etc, but I think the pic I saw was on an obscure thread, like a fake Nismo thread where a customer has bought the product and put a picture of what they did with it (if that makes sense). That V2 thread is awesome tho This? thats but why those wheels done i nice job with them but still

yeah not the best but its not very good in the 350 especially if liek me you have the nismo wing and heavly tinted rear windows, like i said really its just missin the rear view camera!! As for the looks its such a improvement over the 350 rag tops (sorry guys) so much more design went into it and with the 'humped' back looks Bonus with the 370 rag top it was built as its own car instead of like the 350 where they just chopped the top off! Dont know if any of you have seen the top gear write up where they say its one of only three rag tops in the world that handle as well if not slightly better than the coupe version so its def getin some high accolades