P15UL T

sounds like a nice project, a couple of coats of high build primer should help even things out, give it a rub down and you should have a nice blank canvas to start painting remember

looks very nice mate, do you have more pictures of the interior, engine bay etc ? Paul

its has an lamba sensor that you put into the drivers cat , so im told

it sure is

found one get it bought http://my350z.com/forum/turbos-nitrous- ... holes.html

Just though i woul dpost a couple of pics of the HKS camp 2 showing on my current monitors im wondering if 3fiddyz can read the "warning" writing that is on each dial with the screen he is using first one is on the cheaper Veba 7" screen second, my kenwood double din headunit again 7" screen , slightly clearer, less pixelated

the rattling noise could be the clutch, i have upgraded my clutch and flywheel to a lightened ACT version, with this sports clutch system there is a well know low revs rattle. maybe you have this kind of set up in you car and you dont it, i find that it happens when i pull away and dont give it enough beans and it can also happen in other gears if the revs are to low for that gear and the rattle stops as soon as you pick up speed just my thoughts im not sure on the front bumpers but i do know the side reflectors on the bumpers differ from the new to the old Paul

i have been looking for gauge pods for the last few days and havnt came accross anything like that , im pretty sure that sort of thing would be easy to knock up as a diy project

thats the video ive seen all year

lexx do you have the original parts to put it back to standard ?

'ello and welcome Paul

is that not where you removed it from when you stripped it

very nice

i can finally see it,,your a legend mate note: those are the best boobs ive ever seen...ever !!!

i think the rainbows are top of the range stuff at aroun £300 for a set of door speakers ( thats just from memory though and my memory is average at best) i use infinty equipment for my car and the sound is excellent and probably nearer the top of your budget http://www.infinitysystems.com/car/prod ... px?cat=COS not a bad price, but check sizes ect as i built pods for mine so im not sure what the correct fitment would be for replacing the oem units http://cgi.ebay.co.uk/INFINITY-KAPPA-16 ... 56386c67db

lucky bugger on the nismo cooler tis a shame the camp2 dosnt do the AFR or that would be it all tied up in one neat package i think $900bucks its a tad much for that piece of kit , it does look shweet though

hi mate, welcome aboard, imo the car is over priced especially if its not a full GT spec, and its well worth traveling a little further to get the right car the guys on here will look after you and steer you on the right path Paul

yeah its more of a delay i suppose i have ordered the additional sensor adapter along with a couple of pressure sensors, a boost sensor and a temp sensor can you get an air fuel ratio one ?? how have i missed that ???? where did you get your nismo oil cooler from and for how much ???

ive tried deleting my history files and still can only see th first pics

have you done it yet as i cant see any change on my end ??

i quick like the bumper nostrils on the guys "own pic" also the rear spoiler looks nice

thanks for the info guys, i did just assume it was the screen as its just a cheap Veba item i simply want all the info as quick as i can get it, if thats what the HKS puts out then thats fine with me, although i will probably get a better screen for better clarity as i can dislpy the HKS on the kenwood double din i have also and the clarity on that is much better although if im honest i didnt notice if the refresh was any better on the kenwood, but as chris says it is most likley down to the reading of the OBD port I will look into decent alpine monitors 3fiddy - do you have any additional sensors attached to your HKS camp2 ? if so how do you find them ? Paul

I was wondering who would snap first Paul

sa- weet

just checked and screwfix only go up to a 12....damn good shout though