Chris`I

Got the exhaust direct from Stillen. I got it when they did the offer of buying the exhaust and getting the Gen3's for free, so its hard to say how much it was. It was about ~£1300 all in for all of it, but I got a good deal at the time. Definately well worth it, but there may be better deals these days. Just have to hunt around and see what offers they have on. Stillen are very helpful though, and delivery is quick. I think a few traders such as Chilli Red also get stuff from Stillen so may be able to do you a deal. Insurnance wise it didnt add anything as Admiral just add it on for free. They dont however insure mods like for like - but given the OEM bits cost more - thats fine by me

Unless they can prove they have caused the problems that you are trying to claim on warranty, then you will have no problems at all. Many members have run spacers on the 350z for years with no problems, it will be the same with the 370z. I will be getting some spacers as soon as funds allow

We appreciate the adjustment. Although now I cant read it at all

Been meaning to resize/remove it not sure what ur talking about... Really? You have seen my name is in red now havent you

Been meaning to resize/remove it

I used to get patches like that one a few leading edges from stone chips. As Rich says, make sure its actually through the paint and not on the paint. If its through (should be quite obvious, most likely a stone chip), then treat it with Krust from Halfords. It kills off the rust and turns it into a primed surface, ready for a small amount of touch up paint. I did a few places on my old 350z and you couldnt see they were there afterwards and never came back or expanded etc.

Using conditioner is a bad idea especially with the drying towels as the conditioner containers agents which will stop the towel absorbing as much liquid. +1 I think he means just with soap, no conditioner. Especially bad for drying towels as you say, and also microfibres.

Hand wash with Fairy and hot water. Apply the Fairy and squeeze/rinse until it feels clean. Air dry in the airing cupboard

the buddy club isn't much more and you won't have to cut the cooling fins off to make it fit Buddy club is infinately better and not a lot more as Rich says. I would be far far happier paying more to have a buddy club than a K1, having seen both in detail, they are a world apart in terms of quality.

Hence why it was removed - apart from not complying with the selling rules - its downright dangerous - potentially

Yup, WRT is "with repect to" By ipod cable it came with, I meant the USB cable that came with the ipod to hook it up to the computer, if that wasnt clear

Nope, think it was a modified 350z. You could find it on eBay if you like, but dont post it back up here

Nice choice WRT to the ipod cable, you just need the USB one it came with. You can connect any USB hard drive/pen drive with MP3s on it too. WRT keeping her looking good, any quality cleaning products will do. My personal favourite atm is Dodo Juice. Good clean, bit of Lime Prime, some Supernatural wax and Red mist over the top and she will be looking tip top

Ask keV what he thinks of his, he will have the best idea. As for Stillen, wait for one of their offers to come up, either discounted or whatever, they run somehing quite often and can save you some dosh. I got the gen 3 intakes and exhaust for the price you are quotin as they had an offer to get the intakes free with the exhaust

I dont think you will notice much difference between them TBH, especially if the weight difference is negligible The Nismo's are 19s and so too are the standard wheels on the 370z, so I wouldnt be worried about them being too big.

I have no problems with HEL, I have a set on my bike! If you think they are too long, let them know, they will change the design. Or order them in custom lengths, all HEL full suppliers (actual shops) can usually make them to measure and spec

Is the pub we met at last year the best place to meet again? If so what time did we meet last year? I cant remember

Such an affectionate member

I would expect nothing less

HEL are straight lines, and go from the calliper back to the hardline at the car. I have heard for some wearing through the line, as the attachement point isnt provided by HEL so you have to knock your own up. HEL owners can confirm this, as I never had a set, but one person did ask my about Goodridge as their HEL had worn through. Goodridge are the same setup as OEM just made with better lines (ie SS, not rubber). They have 2 connecting blocks on the front, which can be a weak point, if not tightened properly at installation. However they do not suffer the same wearing issues that HEL can have. Either line is good if installed properly. If I were to get some again, I would go for HEL but make sure the mount for them is sound as the lines can wear through if mounted incorrectly.

I managed to use 1GB last month alone spending far too much time on iFap! IFAP is a global network of farmers' organizations. Provides news, publishes newsletters and has regional and commodity groups. www.ifap.org/

I managed to use 1GB last month alone What the 'ell are you doing over 3G to use that much?

I'll get some rearward shots later for you sir

I only got the mount half an hour before a phone interview, hold your horses

One does not strap ten quid cameras to ones Fezza. One uses only the best quality HD cameras