Jump to content

Gaz Walker

Members
  • Posts

    1,426
  • Joined

  • Last visited

Everything posted by Gaz Walker

  1. Thanks very much for the order Ian
  2. We have JWT in stock. The filters can be replaced if necessary. CS has other makes too Sarah, Do you have the replacement filters? How much are they? Cheers Jerry Hi Jerry, You can buy just the filter for £65 or £70 (need to check). As Chris says though, you can clean the filters in warm, mild soapy water, thoroughly dried and then re-oiled Gaz
  3. That's a big list Mark! Having had a quite a bit of experience with assessors over the years, I can assure you that list is very much worse case. They always tend to be cautious on these things because if they find something broken at a later date its very difficult to get the insurance to cough up the extra. Its useful having a friend with a bodyshop as they have seen all this before and will sort the wheat from the chaff Best Regards, Gaz
  4. Good to hear
  5. Hi guys, I've been doing quite a bit of work of Z-store for booking servicing and buying servicing kits - will be finished today. Worth having a look if you want to do your own servicing: http://www.z-store.co.uk/index.cfm?fuse ... gory_id=38
  6. Hi guys, I've created the product in our group buy section: http://z-store.co.uk/index.cfm?fuseacti ... ct_ID=9348 This will make it easier to manage your orders. There is the option to pay in full or just pay the deposit when ordering, and if you want to pay by Paypal you just have to click the option to do so when it comes to paying. Thanks, Gaz
  7. We do need 5 for this price And once the 5 people have been alloted and have paid up whats the wait time till deliver? Also how soon after the deposit would the full balance be needed. I am interested Once 5 people have paid they can leave the US straight after that basically. I would anticipate around a week or so for delivery. You can collect from Envy North or Envy South at no extra cost.
  8. We can do, Paypal address is: accounts@envyperformance.com Delivery will be £11.50.
  9. We do need 5 for this price
  10. Hi guys, OK we are ready to get this going. To order the Berk cats for the 2003-2006 non-HR car, this price is £415 (representing a £75 discount). The 2007 HR version will attract a £50 premium so £465 in total. We need to secure deposits to get the order underway, we are asking for £100. This is payable in any of the normal ways. The order can leave as soon as all the deposits are secured. If you have any questions or would like to go ahead you can get me on the normal numbers - 01670 823333 or 07960 033044. Best Regards, Gaz
  11. Sent a PM in case its us
  12. Postage to Ireland would be £40 Gaz
  13. Sorry to hear about this Mark, such a shame. I'm sure it'll be looking like new again soon though Gaz
  14. Hi Wizard, The pipes themselves are made of stainless steel its just that the Berks have had a recent re-design and you may not be comparing like for like if your getting a good deal on some old stock if your not buying direct. £350 is very cheap for the cats as thats the cost price of actually buying them in the states, they are expensive to post and then theres the dreaded VAT and duty on top of that too. Gaz
  15. Hi Clarkie, The car will pass an MOT with these fitted yeah. Berk has recently revised the design of the cats, and these are the latest type. They should not throw CEL lights, however we can't guarantee that they won't. Gaz.
  16. Very nice Jerry
  17. Spoke with them last night, so think its just a rumour someone has started on my350z
  18. Yep, it does look like that normally, nothing to worry about Gaz
  19. Sorry, should have explained, but this is spot on. Phil ordered them from the USA who were buying in bulk from Japan to get huge discounts, hence he was able to offer set of these wheels at around 40% off retail price. Gaz
  20. Hi guys, Digsy is correct but you wasting your time with Co-ordsport, Phil grey imported the wheels to get them for the prices he was offering them at. Unfortunately Rays won't touch the wheels because corrosion, specifically salt corrosion, isn't covered under warranty because they wheels are not designed to be used on our roads. They are marked of summer use only on the paperwork and any tests that Rays conduct on the wheels will conclude that they've been used in a less than favourable environment! Best thing to do is have them refurbed and change to your stock wheels in the winter to preserve there life. Gaz
  21. We sell the Motordyne Plenum spacers and Berk High Flow cats which are both the best available, they won't be the cheapest but at least you will be getting quality products. Let me know if you need any help. Gaz.
  22. Looks like everyone had a great time fitting some very tasty mods. The Chillis hospitallity is legendary, they are great hosts! I will be down for the next one in March to give a hand, for sure. Thanks Kevin
  23. The Chillis have the Mastergrade version of the T/S diffuser at their place at the moment. Might be worth going to one of the meets and I am sure they will do a test fit for you. You probably will have to do some modifications but Carbon is pretty easy to work with. As you say the T/S rear diffuser is probably the nicest rear end available for the Zed!
  24. Some Pic's of the Varis bonnet here on my car: http://www.envyperformance.com/picasa/350ZShoot/index.html Night and day difference in Quality between the Varis product and the Seibon item. The Varis bonnet comes with rain guards and the fit and finish are perfect! Thanks Kevin
  25. Indeed. Its worth remember though that JWT's will always be cheaper to buy from us rather than the US though When you consider the US retail is $179 + $50 shipping = £165 at todays rate, thats plus 15% tax and 5% duty = £199... So a bargain really
×
×
  • Create New...