SkylineV35

Where was that quoted from? One of my mates has theres done at Cardiff Tints and tbh it was rubbish, airbubbles galore..

I know this sounds stupid and I dont mean to be, but is there fuel in the car? I say that cause one of my mates said car wouldnt start and after checking absolutely everything realised is fuel gauge wasnt working and he had no fuel

^what they said stick with original box, use the rest of the money for plenum spacer or throttle controller.

Lambo White looks amazing I seen one in person

No its well within the V35 adjustment limits.. you will only need camber arms and toe kits etc if you drop it an inch or more. As far as im aware it drops us 1/4 inch roughly and on the saloon versions half inch. Any good garage with alignment would be able to adjust you back within factory spec. I have the 2005 that came with sports suspension I kept the original shocks and changed to 350z springs, yes our cars are heavier but alot of people in the states run this to keep factory comfort and due to our car being heavier it firms it up a litlle too, however does not cancel out bodyroll, thats why I have the eibach sway bars. To be honest id probably skip the getting aftermarket lowering springs and just get something like the HSD dualtech or HKS Hipermax RS but my inital plans were to just do 350z oem springs and save up.. but they have been superb so far and I probably wont change them until one of my shocks die lol or a set of coilovers come up cheap secondhand. =)

Thanks what have you done to yours? I havent really seen many about in person..iv seen a black one with blacked out tints in Manchester onetimeit looked amazing! Thanks what have you done to yours? I havent really seen many about in person..iv seen a black one with blacked out tints in Manchester onetimeit looked amazing! Not too much at the moment, got it in October, silver on 19" team dynamic Wheels. I've done the Ztube upgrade and fitted Apexi power intake filter. Then some sensible stuff like changing Aux belts and cabin filter. Fitted a reversing camera Replaced passenger side window motor About to Fit an H-Dev grounding kit and an OEM front bumper lip which I found on Ebay They do seem to be rare, the Guy I bought the Front lip from said only 140 V35 / G35s in the UK. Planning to go with the silver and black theme looks wise, I don't like the wheel & Tyre set up ive got so will look to change these along with lowering it and replacing any worn bushes / drop links etc. Your window motor went aswel?t lol My drivers side went had to jam a wooden spoon in to hold the window up until I got one ordered 140? thats good news Cheaper way to lower it is put on 350z oem springs and do rear sping mod mount should leave you with a thunb gap between arch and wheel depending on what profile tyre you go on the rear, mine rarely scrapes on speed bumps. Will you be doing the North Wales run? Im planning to do it this year would be nice to see another one around

Yeah I seen a few second hand mono pros going for 400 not longago, thought he would have matched that or cheaper considering mono pros are 800+quid brand new..

Welcome Looks nice in yellow!

Thanks what have you done to yours? I havent really seen many about in person..iv seen a black one with blacked out tints in Manchester onetimeit looked amazing!

Any talc do? Only stuff I can find is Johnsons baby stuff...

I only change car if my catastrophically dies..Iv owned 18cars and never sold one car bear in mind 8 of those cars were just donor cars lol

I know...

hey was just wondering when you say hardwired.. did you splice the cigarette adaptor part? issit just a positive and earth in that wire?

Thats why id rather do these things myself.. its very simple to do.. find a nice d.i.y and attack it yourself

Talc chalk powder where would i apply it? to the belts or pulleys?

I agree bar delete and narrowed looks awesome!

I had a look at them but I feel it would make it too racer looking for me, plus the original grille actually channels air upwards to the intake http://z1auto.com/images/titaniumhardwareg35.jpg if you look at that picture there, theres a scoop at the front that connects to the aibox same as mine. Different from the zeds as they have a duct where the front panel is.

Yes definately man! Chinese new year is around 19th of February so should be coming up around that time

Shall be going supercharged at some point but want to get the Big brake kit and Coilovers on her first, also fancy a leather retrim amd some8.5j front 10j rear rims on the rear but want lightweight forged but the set im looking at is 2grand+ lmao if I can get all that done this year id probably have to survive off potnoodles and biscuits lol

And thanks everyone its my daily and I stick every last penny into her on my crappy wage im slowly getting there

Its the Bkr144 or 44 I think from the R35 GTR, was originally Lakeshore Slate

Spent nearly 2years with her and thought she deserves a build thread... here are the most recent pictures of her.. Recently added a Gialla Front Splitter and R35 Carbon Fibre Bonnet Vents Heres when she was getting prepped took me ages to decide where exactly I wanted the Vents to be.. Rhinolip Sideskirts Carbon Fibre Triple Pillar and Glowshift Gauges Oil Temp, Oil Pressure and Vacuum/Boost Gauge ( I do Intend to supercharge very soon) Heres my modified Hybrid Bike Lmao for when shes off the road or when I feel like I need to lose a few pounds And a cheeky little engine bay shot.. Oh heres rear So what is it exactly? 2005 V35 Skyline 350gt (aka Infiniti G35) Has the same VQ35DE engines as your Zeds same suspension everything but has 4seats and a bigger boot What has been done so far? HKS Hybrid Panel Filter Ztube(wrapped in heatwrap) Velocity Stack Mod HKS Style Earthing Kit D1 Spec Voltage Stabalizer Denso Iridium Spark Plugs Power Enterprise Oil Filter Hyper Garage Magnetic Drainplug Cusco Style Strutbar Eibach Sway bars 350z oem springs(as on my car it lowers by half inch all round) 15mm + 25mm SuperPerforma Spacers Oem Forged 19"Rays resprayed in Gloss Black 255/40/19 Goodyear eagle F1s Asy2 on Rear 245/35/19 Michellin PilotSuper Sports on Front AMS Lightweight pulleys (Will be changing to FluiDampr dampened crank pulley shortly for Fi) CompetitionClutch Lightweight Flywheel Stage3 Competition Clutch Steel Braided Clutch hose Ferrodo pads all round ( Planning to upgrade to D2 BBK shortly) Mishimoto Fanshroud Carbon Fibre Engine Cover Project U reservoir socks D2 Spec Throttle Controller Glowshift Gauges(Oil Pressure, Oil Temp, Vacuum/Boost) will be ordering 02 wideband gauge shortly Aem/ Plx probably Shortshifter Razo Gearknob Full Custom Exhaust including hfcs Purple 5/16 Plenum Spacer Purple Plenum SpacerMrev2 lower plenum(Because at one point I thought i had a Revup ) Samco Hose Kit Plenum resprayed with satin black heat resistant paint Anodized Purple Oil Catch Can Cobra Cat1 Alarm System Styling Wise... Carbon Fibre Bonnet Vents Carbon Fibre Rear Lip Spoiler Carbon Fibre Rear Diffuser Rhinolip Sideskirts Gialla Front lip G35 rear spats Rear Foglight Conversion Osram Xenarc Cool Blue Intense Hids Philips Purple Colourvision Foglights Clear Indicators and bulbs Badges resprayed Glossblack Grille Colourcoded Eyelids I.C.E wise.. Cheapy Kenwood Doubledin Alpine Type S Components My New Years Resolution is to have her Supercharged!

Noone trys to race me... they try to catchup to see what car it actually is It says Skyline on the back and sometimes Infiniti on the front lmao confuses helll out of them! Even had an R35 owner flash me down to ask

Welcome So whats the plans then?

I didnt even notice the plate at all to the point im going to rewatch it to find out what the plate said lol but the Lotus wow!