Fluke

Do you have a vid of this set up running?

What did you have to cut or change on the Chargespeed rear to get it to fit?

Could a mod please move this to the right section for me.

I currently have a Berk HFCs with a Miltek exhaust and want something a bit meatier sounding. I was thinking of getting the Ark Grip, but that's going to be out of stock for a while. What else is worth considering that won't drone or buzz on motorway journeys?

So is it the lamba sensor thats likely to be faulty? If so which one?

I have had my 2003 350z throw up a P1273 code (Air/Fuel Ratio Sensor 1) twice in the past couple of weeks. The car drives fine and I can reset the code, but can any one tell me what I need to do or fix to stop the error code from being reported? BTW - I have Berks HFCs, plenum spacer, a cold air induction kit and my car has been uprev'd several months ago.

Apart from being £100 dearer what's the difference between the Ark Grip and the Ark Grip dual? Is it worth the extra?

I have dashcommand running on the tablet installed in my 2003 350z. Communicating with the ODB2 is fine, but can anyone tell me what settings I should use to get accurate information on the apps gauges?

The alloys need a little TLC and I have them booked in to be refurbed for £50 a corner. The tyres themselves are virtually new, so for £500 collected the set, I'm very happy.

I managed to buy a set of 370z Rays with nearly new tyres for £500. A couple of them have minor curbing so I plan on touching in the curb marks myself as I don't think they need a complete refurb as the damage is so minor. Can anyone recommend a paint match for the original Nissan silver?

I have a set of GT4 alloy wheels on my orange 350z that need refurbing. I want to keep the original polished look. Can anyone tell me where I might be able to get it done in the midlands? Is there a colour code I should ask for?

I had a similar noise that drove me crackers, before removing the dash; try some packing between the windscreen and dash. I noticed that when I heard it, if I pushed a finger into the gap the noise stopped. I have since shoved a piece of black foam between the hash and the screen and the noise has gone. The foam can't be seen. BTW. The noise sounded like a kind of electrical short, is yours similar?

Aquagraphix . They do a top job.

A need to return to the beard?.

Can the car still be used while the brace is off?

Does anyone have a set they would be willing to sell. I am not interested in the condition of the facia for them, just as long as they work. Please PM me with details. Thanks.

I have a set of carbon battery and brake fluid covers and want a set of decals, can anyone tell me where I can get them from?

I have a set of Depo clear lights ready to install in my Chargespeed rear bumper when its fitted. Can anyone tell me what LED light sizes I need and do I need a resistor for them? I plan on fitting indicator LED's, reversing light and fog light. Here's the lights I have.

Is your Miltek y-pipe back ? (So you'd be replacing the stock y-pipe ?) Replied Feepain. I have a Miltek Y pipe and the flexi joints are worn.

As per the title what will I need and where's the best place to buy it from? Do I need to add mollyslip? My car is a 2003 350z with 40k miles on the clock.

Does it make the exhaust note sound any different if fitted to something like a Miltek?

I've been there and done that.....If its a crap job you wont recover it. Spend the extra and save yourself some hassle and heartache by getting it done by a reputable company. Check my posts for pictures of the work carried out by Aquagraphix.

Any pictures of how it looks fitted?

I was on the A1 going into work this morning, when I heard a loud bang on the roof of my car. I noiced that a lorry abot 75 yards in front had a taupaling flapping around with what looked like soil spilling out. I pulled over to check the damage and found a dent just above the window screen and a number of cracks on the screen itself. I have a dash cam mounted in the car and am sure that when I check the footage I will be able to get the lorries licence number and mayabe even a the company details. Is it worth me pursing the company for the damage, using the footage as proof or should I just bite the bullet and get the screen changed? I should be able to post up a vid and some pictures later, I'm not sure if chasing after it is a watse of time?

Here are my efforts, complete with closing lid to hide it. http://www.350z-uk.com/topic/79018-dipped-interior-and-tablet/ http://www.350z-uk.c...blet-build-mk2/