ATTAK Z

The Germans do ... they have done it for years ..... where do you think the part worn tyres sales places get their tyres from ? Oh and 'cellent explanation Ekona

thanks Digsy .......... your opinion is valued

There are many threads recently about wheels, offsets, spacers and 'STANCE' Now stance is a subjective thing so I would like to get opinions on what is the 'IDEAL STANCE' on the 350Z Reading through the various threads on the above subjects it appears to me that the general consensus is that a standard car with standard Rays looks best with 20 mm spacers on the front and 25 mm spacers on the rear but I am willing to be persuaded otherwise PLEASE VOTE ABOVE When we have an agreed 'IDEAL STANCE', I will post a calculator which can be used to determine the spacer size you will need to use on your new wheels to attain THAT STANCE given the size and offsets of your new wheels

yea forgot that bit Wel come

Don't remove it ...... just get a bluetooth module (about £70.00) from PIMM and your Iphone hooks up easily ...... you can then use the Nissan voice control actuation buttons on the steering wheel ... and off you go ..... won't play music though .... there are other ways of getting that that are nothing to do with bluetooth

denso iridium are recommended

You are quite right Neil ... that's why I suggested that the OP needs to be carefull with tyre spec in order to maintain near standard rolling radius and no lsd issues

GLWTS

piccy ?

Wel come

'cellent ....... dibs on second and for free please

18 x 9.5 +30 fronts without spacers would be visually equivalent to standard Rays with 20 mm spacers 18 x 9.5 +20 rears without spacers would be visually equivalent to standard Rays with 26 mm spacers this would give you the 'ideal stance' in the opinion of most members here .... but be careful with tyres so you don't upset the lsd and check for rubbing on suspension for the fronts (see Husky's thread as his fronts width and offset are as above albeit 19") maybe better to put a small spacer in the fronts

18 x 9.5 +20 rears without spacers would be visually equivalent to standard Rays with 26 mm spacers 18 x 9.5 +20 fronts without spacers would be visually equivalent to standard Rays with 29 mm spacers

but the question is... why should Anders go bye bye in the first place Oh no Anders can't go. Who would occupy the Green room if he wasn't here Anders doesn't use the green room .... he can't find it ..... and anyway he's too busy modding the chat room

Yup! My powers have been extended to play with sigs and ranks, so I can change his sig if he doesnt play fair. Banning him I could have done months ago In that case Chris I would be very grateful if you would adjust Sarnie's signature so that it's grammatically correct as below : 'Mandeep, come back we're sorry!!! :lol:'

no cambelt on a 350Z .....

Wel come

Autoglass never asked the question re tint

not as annoying as Sarnie's

Thanks for pointing me to the guide attached here for future reference Window Guide.pdf

My drivers side window is loose .... here's the problem : with the window half way down the window can be moved up and down a bit if you grab the front of the glass ... obviously some fixing is loose my question is : is there an easy fix and, as it will not be DIY, is it best to be done by a body shop or a trusted garage ? If someone could tell me or show me what needs to be done and how easy/difficult it is, I can go armed with some knowledge of the fix Thanks in anticipation PS the window in question was the subject of some warranty work at a dealer some years ago

I always have to give mine a few very quick repeat presses .... seems to do the trick

Plate holder removed .... bumper smoothed ........ plate sited in Zunsport grille ........ euro patent no .1234.ATTAK.Z.56789

Wel come

Gloss black on mine with gloss black roof and limo tint hatch