350 Russ
-
Posts
2,936 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by 350 Russ
-
come on then whats the difference?
-
is this actually a nismo exhaust or is it a pic of a different one? i didnt think the nismo was a dual one? http://cgi.ebay.co.uk/NISMO-S-Tune-Cat- ... 720wt_1139
-
do scorpion do a y pipe for the 350?
-
In Dash Computer/ OBD2 information-FINISHED @ LAST
350 Russ replied to Cookbot's topic in 350Z General
if it will work with the OBD2 leads then im up for it! any chance you could try it out? i think alot of people on here would be after it as they all seem to ask nurrish for it in his system, i would pay a bit more within reason for it to run it, i already have sat nav in my headunit so thats not as important for me -
i was just sick a little bit in my mouth http://www.autotrader.co.uk/classified/ ... ?logcode=p
-
, scary thing is that there is probably people out there that clean their car this way
-
In Dash Computer/ OBD2 information-FINISHED @ LAST
350 Russ replied to Cookbot's topic in 350Z General
very cool, i could be interested, i dont have the bose, i have an aftermaket headunit, how would that affect it? also could you make it have the engine sensor to show temps and stuff like on a gtr or would that require special hardware/software? i have my own sort of unit in there similar to nurrish's but this looks alot better -
yeah just any sort or silicone sealant will work, clear bathroom sealant will do it but make sure that its mould resistant. plus it sticks like sh*t to sheets. bad point is that if you ever want to remove it then there is alot of silicone stuck to the bootlid which will not be removed bar a respray
-
you will prob have to drill extra holes in the bootlid to fix it down properly, if you mean silicone to bond it, then you should only use the bolts to fixit down with, use some silicone grease around the bolt holes to keep it watertight
-
http://cgi.ebay.co.uk/Nissan-350Z-Nismo ... 2509wt_905
-
did you use a paint cleanser after you polished and sealed or just cracked straight on with waxing?
-
i love them! absolutly stunning cars, are you going to order one then?
-
thats a few quids worth, is it a genuine rear bumper?
-
-
has anyone got alessandro's phone number? i need to get hold of him asap as cant make the meet later and dont want him going there to find i havent turned up
-
Best Detailer + Dentman in the london area.
350 Russ replied to Demolition49's topic in 350Z General
there is a detailer in ascot, he specializes in gtr's too. he also does dent removal, window tinting and vinyl wraps etc. http://www.detailingworld.co.uk/forum/s ... p?t=207718 -
are the meister zeta coilovers any good? they seem too cheap to be any good, reminds me of japspeed
-
thanks mate , it had blown and its all sorted now!
-
my cigarette lighter has stopped working, im guessing its just a fuse, can some one tell me which fuse it is on the interior fuse board?
-
there's a guide I made in the guides section as to how I fitted mine, I would put up a link but I'm on the phone and can't be arsed
-
i was reading nuts earlier and saw a zed on this ad, it looks like a club sticker in the side window
-
is it a jdm? probably about 7ish i think but im not too sure, buyers are put off by mods, its a gorgeous zed though, if you think of breaking it and going back to standard im sure you could end up with more
-
Tanabe medallion touring y-pipe back exhaust
350 Russ replied to Tarmac@TarmacSportz's topic in Tarmac Sportz
i might have a one of these off of you at the end of the summer if finances permit. does it include y pipe? -
i got a set from MW Tech, one of the traders at a really good price, have never had any grief with them and are really well made,
-
its a honda s2000 ariel so you may be able to find one on ebay or go to a honda stealers if you get desperate