GT4 Zed

Sorry to hear this mate. Good thing you are not hurt. the zed will be up and running soon enough

Welcome I read from so guy in france who frequents the nurburgring with his zed that you can only fully disable it from somwhere behind the dash or center console i will email him and find out exactly what it entails. Do you have the Performance Friction 01 pads? i can vouch for them 1000%. i recently had to replace my Ksport sports pads (which are rebadged ferodo DS2500:P) after they disintergrated and almost damaged my front rotors The ferodos where very good and very disc friendly but this PF01 pads are out of this world ..........like having your own personal anchor Bite from cold is very good for a race compound pad and it gets even better when some heat gets into them! However, i am sure the trade off will be diminished disc life but i will live with that! Just noted that you have decats with a standard setup. you will be making less power and torque likely unless you get an ECU remap. Abbey or RSTuning offer excellent service with these

nice one zedjohn bump for more zedders to come on board!

sorry mate its got back on the car as i sold my AEM CAI to release cash for my project but will become available if the happens

I have the same setup like Nixy but its made out of vinyl and its legal! Just stuck it over the holes will post some pics up later

Just saw this Was going to put up a post to gauge interest myself Been going there since summer 2008 and on about +100 laps now with regular sub 8:45sec bridge to gantry time(best time 8:15) with my zed. I was going to post up my eventful trip of October 2009 but got discouraged writing up as i lost the video i had taken by car behind me! Anyway i am prepared this year and have got my bullet cam and the zed is in better shape as all the suspension and brakes upgrade has been completed and just a few more thing on the engine side and it will be perfect. Anyway as it seems there is reasonable interest from within it might be a good idea to start a list and and vote on a date which will get the best turn out! IMHO a bank holiday week is usually the best time for a group though i usually plan midweek trips to avoid the busy weekend tourist days! My first trip will be at the end of April and i hope to make 4 trips in total this year There are hundreds of resources relating to the ring and getting/staying there. I volunteer to gather these up and collate to a new thread with definitive list and travel info. But in the first instance i feel we should start off here first with the interest. Some Links(feel free to add ) http://www.nuerburgring.de/en.html http://nurburgring.org.uk http://www.northloop.co.uk/index.htm http://www.nurburgring.co.uk http://rsrnurburg.com http://en.wikipedia.org/wiki/Nürburgring List Name Preferred dates 1-GT4 zed-------------------------------- May bank holiday or any other group date 2-?Zed John 3-?Rob-Hughes 4-?Glenn 1981 5-?Roo 6-?Wizard 7-?Anubis 8-?swooper 9-?Sleg 10-?Thomasorenson

Dave, these are give away prices GLWTS

Congrats James

Mine is fine but had issues on my first zed. so just stripped/prepped it and resprayed with matte black paint from halfrauds and was very chuffed with the result Changed the blades to the flat bosch aero ones to complete the "upgrade" With the stealers you will have to buy 2 and i can but they are'nt cheap. those clown tried to sell me a single bolt for £4. i got a 8 in SS from Halfrauds for just over £3

Just like Nixy and others said, the zed is fun in all weather and all the controls are weighted just right like a good sportscar/GT should be. Infact it punches well above its weight your comments and reactions suggest that you liked the looks but expected something else from it. It may also reflect on your lack of experience with performance at the level and its no bad thing! If all the baggage that come with the car are not for you and you want to split now then so be it! Cragus will have your exhaust in a flash and you would have missed the opportunity to discover something wonderful come good weather You will also loose some dosh and regret you did not give it a go! My zed is always dirty because i treat it like a race car but i love it to bits and it rewards me plentiful Goodluck with any course of action mate

No problem Thomas, thats what the forum is for Have you taken your baby there yet It will be a blast i reckon with that Novidem on song i will be there a few times this summer and would be nice to meet up Sorry Mike, my bad

fantastic mate ta Hey wolf boy, don't go stalking the poor chap now Anyway i can't bame you! the wheel is a beaut and will suit your zed in GM i'm sure you can swap with Alex on the ready painted ones he has for a small token his way! i wouldgo for red or even yellow Do i take it that you will be considering lowering the zed to make it work well act fast as the are some springs about on the sales items PS. The new deal is on and just waiting for the first shipment to arrive so i can go check them in person before engaging this fellow

I think I may be your dad ..... I spent a lot of time up your way in my youth ... what's your maiden name Ahaahahahaha! you guys are cracking me up ROFL 'Appy birthday Ol man and glad you met you daughter too!! Have a great day

I always found it hard to pronounce let alone remember all the bends on the Nurburgring-nordschliefe So this is a fantastic link from Ben Lovejoys popular and resourceful website! i just saw it today though i have been trawling it for info since summer 2007 . It gives you the history(sometimes dubious) behind the names, their meaning and theres a lap with the bends fading in and out to help you remember http://nurburgring.org.uk/bendnames/index.html

No flash mate, back firing LED's send info pleeeeeeeease Nice Fiddy, please post a frontal view with only LEDs on and with dipped beams. Husky, should i be thinking what i'm thinking?

I have similar Offsetted 19"s. Front is Ok but can take a 5mm spacers if you want a very flush fit. Rear offset means you need 15mm spacers. you could get away with 20mm if you use the 275 tyres. Falken tyre are fine, but 285 is better and you profiles will be better as 35 all round if you go with 275, but 30 if 285! However at £1400+ there are better combo's out there

I agree, it does seem strange. Perhaps the tolerances on oem suspension parts are pretty liberal! Beats me too ...........its possible that the only reason they have no trouble is because they don't recheck the geometry after lowering or they never take the car close to the limit to healight alignment issues or just donot do enough miles to see the accelerated inner tyre wear from running excessive neg camber On a seperate note; i have been experimenting with a new set up for my rear and can't seem to dial-in the desired toe-out for any given camber less than -2deg as it stops at .5deg toe out no matter what i do so it looks like i will have to get adjustable toe arms to give me more flexibility! Also with the front i can only get the Ichiba arms to dial-in not lower than -1deg 45mins camber(its ok on my current settings but it means i can't get within stock alignment if i chose to!). You can get up to -3deg easy though:lol: No problems with range of toe adjustments:thumbs: Anyone experienced this or has answers to the above! sorry if this slightly detracts from the post though relevant IMHO

'Nuff said

Use the secondary rear hatch release which is located eccentric(towards passenger side) on the underside of the rear strut brace to open. You can investigate from there once its open (Go to page 3-10 of your user manual for illustration if unclear)

Give Husky a pm. I think he is considering selling his 19" hiro or something that looks exactly similar

Looking spot on Steve. Its all comming together nicely i like the wing and probably need one to make the rear stick! i am still struggling with set up high speed and will be doing some tweaking again tomoro so don't be surprised with some pm's your way i have the hDVR 720 from dogcam which i got at autosport for £190 and could lend this to you until you get a recording equipment or when i am going to the Ring in summer! It will be really nice to see you race with on board shots so we can shared your experience. Anyway i will come and see your first race at list cheers

Had same issues and slighty notchy droping down the box in track conditions or fast road work a while back but this was been cured after i changed the gear oil for Motul gear 300. Also changed diff oil as i was so impressed. Now EVERY fluid in the car is motul However, there is a small stiffness when very cold which as everyone knows it's normal for the zed but i usually drive off only after the engine is up to temp

+1 sorry mate. Just put it behind you as a bad call which will never happen again

This will be kick ass on our roads

This clutch / flywheel issue in my opinion is a can of worms that needs addressing for sometime now! It is uncommon to need a clutch change under 40k on the zed unless you have no mechanically sympathy or drag or track the car endless which is understandable accelarated wear and tear. This is not hot air but coroborated by nissan and exedy. i had a long chat with the Exedy representatives at autosports at the NEC and it is very clear that the flywheel is more than capable. For US here when the time comes to replace clutches there is always the question of: Do i need to replace the flywheel too! My answer is catergorically NO unless there is proof it is damaged and not salvageable! yes some issues can sorted and the same unit reused safely! The dual mass OEM flywheel is very good and sturdy and almost always outlasts the clutch so unless you want to lighten the driveline for obvious reasons of increased responsiveness there is no need to change this as is often the case! The second issues is, since you will be changing the clutch anyway you need to decide what you plan to do with the car in the near future so you can save yourself so cash on double labour/parts. If FI was your plans then and you know what power range you will be shooting for then it may be better to go for multi-plate stuff which have in-built flywheel at once but ofterwise the OEM spec clutch made by Exedy is perfect for all NA zeds with or without mods So the real question comes down to the single mass flywheel. My personal opinion is that the single mass flywheel has more drawbacks than benefits and most people get them because they are told they need to change for them with the clutch at the sametime either because dealers/traders want to make a sale or erroneously that lightenned singlemass flywheel will make their zeds more powerful or faster! Yes it will improve responsiveness but the effect is marginal especially in NA tune as oposed to spending that money on an uprev reflash or better brake pads or disc or tyres or even the D1 spec controller for that matter . You can also do alot more effectively with short shifters or changing final drive (e.g 3.9) for more accelaration or response and have a very driveable car without vibration and chatter with high bitting point = stalling which you get with the single mass item! However if the single mass flywheel fits your style/objectives and you are going into it with your eyes open then thats cool. I think fitting a clutch should be tackled by somene who has experience with these and on the zed, if not horror stories will abound. I know CS gets the job done and a few others here Finally, it is worth having someone else have a go with you can to see if your clutch is "gone" or if you need education as these things do happen especially to noobs on the zed . There is a long list of trouble shooting/FAQs on Exedy's website which are quite helpful. (http://www.exedy.co.uk/index.php) just my 2p worth