ZMANALEX

As what James B says. Take it straight back to the dealership immediately and leave it with them until it is fixed properly. It should not have left the dealership with a severe brake shudder. Did you not test drive the car prior to purchase.? Alex

to the forum mate

I have a set of Genuine Nismo 19" LMGT4 rims and tyres coming off a car end of this week. Rims are unmarked and tyres are circa 7mm. Alex.

NO, these are not suitable for your application. Martin has directed you to the correct plugs for your car. Plenty in stock and good to go same/next day. Just if I can help you further. Alex.

Hi and welcome to the forum

Hi and to the forum mate. I have plenty stock air boxes, filters, and pipes in stock. I also have the MAF sensors and housings if required. You have PM Alex.

10 in stock Just for next day delivery

Brand new and Genuine Nissan in stock. viewtopic.php?f=157&t=43453

There are 3 different types and I have them all in stock UK Zenon, UK Bi Xenon or JDM Drop me a pm with what type you require:thumbs: Alex.

Vulture.

No real drama then.

PM received and replied to Steve. The gearbox and diff drain and level plug washers are not crush washers so they can be reused although the Nissan workshop manual does say to replace them.

Shipped this morning Jim Should be with you tomorrow Alex.

Very easy to swop out mate. In stock and ready for same/next day shipping viewtopic.php?f=157&t=31548 Alex.

Nothing really to worry about, they will take a light weld, however may be best to just replace it with a low mileage preowned one of which I have plenty in stock. I personally would just run with it as it will still be working okay and what you see is purely cosmetic although it will not be pretty. Just if you decide to replace it and I will get you sorted.

Unfortunately you have got to buy the complete mirror Hannah. Fortunately I have a few preowned mirrors in stock. If I can help further then just and let me know what colour you require. Alex.

A cable tie is your friend.

I have two sets of preowned DC sports stainless headers in stock. I also have an unbranded set believed to be HKS. Drop me a pm if I can help you further. Alex.

PM received and replied to Plenty in stock Alex.

Jez, when disconnecting the SC UJ you really should lock the steering column from turning and as Mark has said you may have damaged the wiring on the angle sensor. Why don't you centralise the wire and get the wheel into the correct orientation and take it from there however Consult 2 may have to be your friend. Alex.

This is the fix. viewtopic.php?f=157&t=43456 viewtopic.php?f=157&t=43455 All in stock and good to go same/next day.

Providing the garage has swopped over the panel on the inside if the old wing which acts as an insulator between the wing and the door hinge area then you should not experience any axtra wind noise. If they have failed to swop this panel over then you will most definately experience extra wind noise. Alex.

Very difficult to tell from the pictures, however a word to the wise: If you have simply just "hung" your cooler from the top set of fixing points then unfortunately these will soon break off due to vibrations etc. You really do have to reinforce this install by connecting the top and lower fixing points of the cooler by suitable threaded rod and tubing. This is no criticism of your install but simply a point being made to avoid you any issues in the future. Alex.

What one header Quote "a header" There again, a header set. Any way, if that is what the OP requires then I have aftermarket header sets in stainless or plenty stock cast ones. And a by the by "Where are my bolts" Steady Zeddy?????????????????????

I will have all the above. Do you want to remain stock size for the pulley set? You will also require a belt kit which I have in stock sizes or any over or under sizes are available next day. What exactly do you mean by "header"? I am sure that I will have it in stock, but just calling it by a different name. Alex.