Jump to content

ZMANALEX

Members
  • Posts

    15,108
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. You will get the part number from any Nissan garage that sells the Nismo 370.
  2. Any Nissan garage that sells the 370Z Nismo will be able to supply a genuine Nismo front end. After market panels usually require quite a bit of work to get them to fit, so a case of buyer beware.
  3. Hi Brian and to the forum. I know this car and Kenny had the same issues with items 3 and 4 that you list in your initial post. I can't remember what the items in 1 and 2 are for, but I am sure Kenny will advise. Alex.
  4. Should have these in stock Ben, Just drop me a PM if I can help further. Alex.
  5. to the forum.
  6. to the forum.
  7. Should have all the parts in stock that you require. Just drop me a PM with confirmation of which parts you require. Alex.
  8. The angles for the prop and drive shaft are already kaput with so much movement. If the front bushing bolts are loose then tighten them up . If they are tight then you will have to replace the bushings.
  9. to the forum.
  10. A small proper patch on the inside and a sympathetic cosmetic fix to the outside and you will never notice it.
  11. There should be no movement on the front or rear diff bushings as you have described. I am surprised that you are not getting a clunk when accelerating or de accelerating. I would not rule out that the bushing issue may be contributing to your hum, but I have not read your other thread. Alex.
  12. to the forum.
  13. to the forum.
  14. The R35 GT-R runs upgraded fluid from the factory, however I have found that Motul RBF 660 is superior. The GT-R oem lines get changed at every 60,000 miles or 5 years at the G2 service.
  15. Don't let that detract you as I have plenty dash air bag covers in stock, so no drama.
  16. to the forum.
  17. http://www.demon-tweeks.co.uk/blog/performance/what-wheels-will-fit-my-car-the-dt-alloy-wheel-fitment-guide-2/?utm_source=ROAD1447B&utm_medium=Email&utm_campaign=Blog3-DTAlloyWheelFitmentGuide&dm_i=HNI,2ZTZ3,2GLOW4,AS5HN,1
  18. to the forum.
  19. Welcome to the forum.
  20. to the forum.
  21. Sorry mate, no metal oem are in stock at the moment. Remember that the Seibon wings are + 10mm so plenty space for your full lock antics. Alex.
  22. Dirty MAF sensors are the usual demon for this issue. Glad to hear that you are sorted. Alex.
  23. I should have one Elliot, what colour do you require ? Alex.
×
×
  • Create New...