Chris`I

hi Chris, the finish has a satin sheen to it, not glossy like the laquared carbon you get heres a picture of the dash done (not my own work but using the same material) Looks good to me. Is the finish textured or smooth? Sorry hard to tell from the pic. Looks the nutts though. Probably get the centre console covered and maybe the bit over the transmission tunnel (armrest bit). Reckon you could do that? Will get some other bits flocked and it will look the nutts So reckon you can do my lights and that at the hoon on a night?

Indeed and I have it now. However you do need to cut the rear bumper slightly. I'm not massively confident in it, I think it needs some more bracing or something. Its solid and I can hang off it, but it has some movement, which I think is in the rack and not the mount. Its basically a Halfords tow bar mount with a custom hook up to the Zed towing eye. This is it on the old owners car: Unfortunately, for a roadster the only off the shelf one you can get is the BIRD Automotive.

JWT pop charger is £120 now I'm afraid Thats exchange rates for ya Got mine for a bargin 50 quid SH

Tempted to dig out any old crap I have in the loft and sell it on here, anything seems to go!

Dont forget your 710 cap

Nice one mate. Glad NMGB realised their mistake this time.

Depends on your budget. There was one going second hand for about £650, and you can get them new for considerably more. If you want a new one Adam@Z1 is likely your best source.

Thanks Guys, I've been out all day Pm's sent to all those who pm'd me and posted to all those who ordered. You need a secretary. Martin W is pretty much living at yours at the moment by the sounds of it, why not make him earn his keep by answering the phone and PMs

Better get that airon installed in my bedroom then. Some points last year it was unbarable. If its going to be hotter this year, I'll be sleeping in the car with the aircon on

The only way I can see it working is if you get a trader on board and have it sent to there premises. Say for example Adam can get them for the Chillis or CS cheaper than they can source them themselves, then you could have them delivered to them and distrobuted from there, say some for them plus the ones for the GB. Will give a good saving on postage which is where the most money is saved in GBs from the US

Very nice mate I want my centre cosole doing like that, but with the Aston like fat stitching down the side where the corner of it is. Also looking into flocking which gives a similar effect but can be done cheaper and easier on the more difficult bits. I would avoid the fake stuff, mine looked mint but now starting to fade on the bits in the sun

MJP are traders on here, you get a discount too I think CS and the Chilli's could potentially do it cheaper though, shoot them a PM As for the gains - slight (and I mean slight!) gains can be had, but mainly for noise. You can actually lose power in certain instances due to heat soak, but when moving its not a problem.

Dont buy it Cheap and nasty, wont filter sod all and the last thing you want is dust getting into the engine! Get a filter from a trusted trader on here and you know you are going to get good filtration and it wont kill the engine. The proper ones cost more for a reason

Doesnt supprise me in the slightest Nissan like to add things to the task list, it keeps them in the job Dont have to be done at the same time, but for the labour costs, its usually best to get them both done. Saying that, its usually people who need the clutch doing that get the flywheel, not heard of anyone who has the flywheel and thinking of doing the clutch! How old is your clutch? Might be worth replacing it, or hold off on the flywheel until you need the clutch?

Think I did my boot with about 5m, but it was tight. 10m should be enough, but if you want to do things like the speaker pods in the rear of the car, you'll probably want even more!

I might make you a friend of Amanda, that would really confuse you! If people join the "Facebook - 350z-uk.com" group then there is a forum page on there that says everyones forum name

Do you ever get Martins?

+1 - the only stuff I saw going that cheap before was the end of roll stuff where they cant guarentee that any 2 pieces you get are off the same roll or batch. That way you might get slight differences in the colour. Might be worth sending the seller a message to make sure this isnt the case.

Think I'll be in the list after Wales! Whats the finish like? It looks like unlaquered CF, is that what it looks like in real life? I like the idea of a carbon dash but dont want it to be shiney. Guess I will find out at Wales

In broken Engrish - Magnet of Bullet

Jerry I think you are fast becoming the new Sarnie

Fair dues, but I meant the ones that we are interested in aren't made in the UK, like the Work, Volk, etc. So.... Touche I agree there are plenty of finely made wheels in this country, but I've never heard of Work being made over here. Could be wrong though, wouldnt be the first time

Lakeside is just off the M25 , so what would people prefer, individaul or teams (2-3 ppl) ?, this dependent on it being held at lakeside ? Yeah, but how far round from the M4 and M3 It basically more than doubles my trip from 35mins to nearly 1.5hrs! I'm up for it either way I reckon, just you will definately get more interest if people dont have to go all the way around the M25 to get there Same for us mate but the other way round! will easy take 1.5 hours to get to heathrow Fair enough, I didnt realise you guys were that far away! Just thought there would be more interest if it was more central. Maybe I should badger my regional meets organiser to do one for my area

Payment sent Tim, look forward to getting it and having it fitted