MONKEYSOCKS

Just finished reading your story on the zed from start to finish. Amazing. 👏 👏 👏

Finally getting all my relevant jobs done before getting it mapped. Paul West at TPW engineering (who used to be at TDI North) is not far from me and it looks like he's saying that in collaboration with Abbey you can now get ecutech for the 350z? Anyone know what the key differences are between this and an uprev?

Wonder if it would help with torque figures on a dyno?

Sounds like a decent piece of kit to be fair, is is it worth replacing the other pulleys whilst I'm in there?

Probably a stupid question, but would the fluidampr pulley help with lightweight flywheel chatter?

Cheers mate. 👍

Are these suitable for road use Are these fine for road use mate, or just track? refurbing the arbs myself but was stuck between these and Hardrace bushings.

Could be an issue with your MAF sensor or throttle body might need cleaning. I'm sure someone will be along soon with a definitive answer.

Okay, 🐻 with me. Thought I could replace the stock anti roll bar with whiteline kit included drop links, just in terms of removing rusted oem parts. However after a quick chat with Tarmacsportz they've said it can't really ride at stock height should I change to whiteline drop links, so would have to run oem drop links with whiteline arb at least until I eventually plan on dropping the car height . I'm sure I've heard somewhere that aftermarket arbs will chew up stock droplinks though? Is this correct?

Great set of tips you've got there 😉

Lockwood & greenwood in Ashton under Lyne should be able to help mate.

Good stuff mate, much appreciated. 👍

Guessing the cat brace needs to stay on for cobra hfc's? Heard they'll crack with out it, Is that right? I know people who run art pipes don't need them, but i would imagine it's different with Hfc's?

I'll find out what state this one is in and give you a bell Alex. 👍

I'm also going to get whiteline arbs and droplink kit. Is there anything else I should possibly look at whilst the exhaust/cats are off? Slave cylinder etc?

Hi mate, yeah I've got new rear kidney brackets on order, and getting rid of the board assembly, whilst the works being done. I'll have a look at the state of the subframe brace and go from there. Cheers for your help.

Yeah, I've got that on order as well. Cheers mate.

Hi Guys, trying to replace old for new on my 350z, it's going into Tarmacsportz in January. Is there a better aftermarket replacement for the rear subframe support brace? Or do I have to just order a new one? I've ordered ultra racing w brace and ultra racing front brace, are there any other braces that I need to be aware of? Because I've only just found out about this one! https://share.icloud.com/photos/057jknR0jU03NYM1rXDzp2VjQ

Yeah, I agonise over things when it comes to decisions for the 350z. But just gone ahead and ordered them to be fitted next week, I'm sure they'll do the job.

Also just to say that I don't track the car, so guessing the mps5 tyres would still do the job very well?

Just realised it's the mps5 tyres they've quoted me on, is there anything comparable to the mps4s tyres that I currently have?

Just been quoted £180 per tyre for mps5s on my 350z 18" tyres. Currently running mps4s but apparently mitchelin don't do the front tyres any more on the mps4s. Should I consider the Pirellis instead? Or go with the new mps5s?

Have a look at workshop 12 mate, that's what I'm saving my pennies for.

Cheers mate, hopefully the switch will sort it, as long as it's not the abs modulator as I'm running low on will power right now. 😆

Did you manage to get it sorted mate?