MONKEYSOCKS

Cheers mate. 👍

Are these suitable for road use Are these fine for road use mate, or just track? refurbing the arbs myself but was stuck between these and Hardrace bushings.

Could be an issue with your MAF sensor or throttle body might need cleaning. I'm sure someone will be along soon with a definitive answer.

Okay, 🐻 with me. Thought I could replace the stock anti roll bar with whiteline kit included drop links, just in terms of removing rusted oem parts. However after a quick chat with Tarmacsportz they've said it can't really ride at stock height should I change to whiteline drop links, so would have to run oem drop links with whiteline arb at least until I eventually plan on dropping the car height . I'm sure I've heard somewhere that aftermarket arbs will chew up stock droplinks though? Is this correct?

Great set of tips you've got there 😉

Lockwood & greenwood in Ashton under Lyne should be able to help mate.

Good stuff mate, much appreciated. 👍

Guessing the cat brace needs to stay on for cobra hfc's? Heard they'll crack with out it, Is that right? I know people who run art pipes don't need them, but i would imagine it's different with Hfc's?

I'll find out what state this one is in and give you a bell Alex. 👍

I'm also going to get whiteline arbs and droplink kit. Is there anything else I should possibly look at whilst the exhaust/cats are off? Slave cylinder etc?

Hi mate, yeah I've got new rear kidney brackets on order, and getting rid of the board assembly, whilst the works being done. I'll have a look at the state of the subframe brace and go from there. Cheers for your help.

Yeah, I've got that on order as well. Cheers mate.

Hi Guys, trying to replace old for new on my 350z, it's going into Tarmacsportz in January. Is there a better aftermarket replacement for the rear subframe support brace? Or do I have to just order a new one? I've ordered ultra racing w brace and ultra racing front brace, are there any other braces that I need to be aware of? Because I've only just found out about this one! https://share.icloud.com/photos/057jknR0jU03NYM1rXDzp2VjQ

Yeah, I agonise over things when it comes to decisions for the 350z. But just gone ahead and ordered them to be fitted next week, I'm sure they'll do the job.

Also just to say that I don't track the car, so guessing the mps5 tyres would still do the job very well?

Just realised it's the mps5 tyres they've quoted me on, is there anything comparable to the mps4s tyres that I currently have?

Just been quoted £180 per tyre for mps5s on my 350z 18" tyres. Currently running mps4s but apparently mitchelin don't do the front tyres any more on the mps4s. Should I consider the Pirellis instead? Or go with the new mps5s?

Have a look at workshop 12 mate, that's what I'm saving my pennies for.

Cheers mate, hopefully the switch will sort it, as long as it's not the abs modulator as I'm running low on will power right now. 😆

Did you manage to get it sorted mate?

Hi guys, sorry I've not been back to you, mad busy at work. Anyway, got my car back a couple of weeks ago, serviced and Mot as well as the brakes. They did admit that the young mechanic that originally worked on it messed up and didn't top and tail the pads, also broke the block on one of the braided lines. I suspect that he also broke the caliper as it was the same side that the braided line broke on, but can't prove that and they didn't admit to that one. Dave Greenwood eventually stepped in and got everything straight for me. Still got my ABS, ESP off, Traction control light coming on which was happening before the new brake parts were fitted but got a new Nissan brake switch ordered so will hopefully fix the problem. I'm booked in with Tarmac sport in January for more work I want done, so thanks guys for that recommendation, just over an hour drive from me so I'm sure it's worth the trip. Would still recommend lockwood and greenwood to anyone for service and MOT but must admit I was let down by them on this one. Just also want to say another massive thankyou to ZMANALEX who really went out of his way to help me.

Just watched your video mate, did you find out what exhaust was on it?

Yeah, the zed is pretty simple really with electrical issues, Hope you get it sorted mate. 👍

Thanks mate, was starting to forget what it looks like 😆.They've had it for quite a while now, they've had problems trying to fit the new brakes, they broke front caliper and the block on one of the braided lines during fitment. Had it serviced and Mot done as well. Hopefully I'll get it back soon, desperately needs cleaning.

Any idea what type of oil is in the car? Hope you get it sorted anyway.