da.murf

Selling due to lack of use and another project. Rev Up Engine (single intake version) Approx 310bhp with 7.5k rev limit Car has been meticulously cared for, serviced and carefully and tastefully modified Bodywork and paint is 100% blemish and ding/dent free & Arches/sills etc are perfect. I purchased the car 5 1/2yrs ago and from that point have worked to try and create a subtle but purposeful looking 350z. Car spec is listed below. 67656k (might increase slowly as car is used at dry weekends) Upper & Lower suspension Arms replaced at 65k Whiteline Adjustable control arms at 65k Xtreme Clutch & Single Mass flywheel fitted at 62k Below work at 60k Whiteline ARB bushes Whiteline Uprated W Brace Nissan OEM kidney braces Braided front and rear brake and clutch lines MTec uprated discs and stoptech pads Full fluid service inc diff/gearbox/engine oil Plugs replaced at 55k Car has a full resonated milltek exhaust and JW Popcharger intake. Very subtle on tick over and daily driving but on full throttle it sounds as a v6 should. Zero motorway drone Front bumper was smoothed and front plinth removed, inc in sale for MOT's etc. Zunsport front grill delete The rear of the car has a genuine KBD Polyurethane Ducktail spoiler. Side skirts are subtly extended with tarmac sports skirt extensions. Front lip is a ‘Mines’ fibreglass replica painted gloss black. No speed bump issues. Car is lowered on eibach progressive springs. Nice drop but not crashy or too stiff. The wheels are very rare 19” genuine nismo staggered LMGT4’s (8.5” & 9.5” rears) tires all have above 3.5mm thread Interior remains fairly stock with a few age related marks sub not cracks/rips or damage Rear glass and rear quarters are tinted by pentagon NI. Are perfect with no bubbles etc Steering wheel has been upgraded to a jack royal hand made alcantara wheel with subtle orange stitch Gear knob is a rare south bend clutch billet aluminium piece with a nice feel and weight to it. Sound system less than a year old with a full pioneer setup inc sub/amp/components and tweeters. Sounds incredible and professionally built. Personal reg will not be with the car. Pictures speak for themselves You will not find a cleaner better cared for example of a car that is getting rarer on the road and more collectible. Thanks for looking Located in Northern Ireland But 10 minutes from airport and port. Can work with potential buyers regarding travel etc have sold a few cars to mainland and its a nice day out for the new owner and I can collect from Airports/docks etc Priced at £11000 but open to offers and will work with Forum owners on price Photos of all the work inc clutch etc can be provided to potential new owner

I’d say they’d look incredible. Mine Are the 19” staggered Option. that Nismo looks lovely. Think it’s one of the few cars I’d leave my zed for

Was sent this of my car yesterday love how it’s sitting right now. Away this weekend for a subtle sound build

I didn’t know he also did repairs?

he has been saying no one is able or wants to tackle his broken zed roof motors.... anyone have any ideas who could do it??

i find his energy and enthusiasm refreshing. Yes he can be a bit full on in certain ways but he isn't afraid to laugh at himself and seems to seriously have a decent broad knowledge across a good few car types/brands and scenes. I glance through his car park meet stuff but I think that's his bread and butter for content. He has done a few very good show videos over the last little while.

Few Photos from cleaning recently after the MOT

Well been a weird 6-7months with the zed. Feels as if it’s been 1 step forward and 2 steps back in every department. But sometimes that’s how it goes. Below is pretty much an update from last October to today.so last autumn the car was prep’d for going away during winter months. Washed etc, headlights cleared, cleaned and treated by local detailer at PMG and new badge popped on front to freshen up the car. the car was suffering from bad brake shuddering, and despite the pads and discs less than 18 months old They where badly warped. They where skimmed, car sat on stands for a week. then it went under cover with a trickle charger Summer 2020 has seen the bumper smoothed and rear ducktail fitted but before it went under cover the rear spoiler began to react badly. Bubbles full of water. There is another thread about it and I’m not going into much more detail. so winter came and wife got me a lovely present for Christmas thanks to Reinis B Photography it was time to sort the spoiler and get it back onto road for spring.unfortunate circumstances with the painter led to Me having to sort the spoiler myself.old spoiler needed removing so out came the lidl dremel style tool and find metal wire.Then we realised the old one had been screen bonded on and 7hrs later it was off with no damage to the car.... never again Ordered a new KBD ducktail from California and the amazing AG Automotive sorted it.Had the boot lid painted at same time to freshen up and also ensure the fitment was perfect. Honestly blown away by the finish.time for mot.... ballsfailed on worn suspension bush and front window drivers and passenger side tints (chanced my arm with them lol) Must say a massive thanks to Coz at Torqen for sorting next day delivery to Northern Ireland when I forgot to order lower arms to company the banana arms. so off to Ricks Garage Glenavy to get full front end refresh and then to Ivan Kerrs to get alignment. Unfortunately due to Eibach lows it needs adjustable rear camber arms to really dial it in.... next month lolback would really recommend both Ivan and Rick that’s the car back on the road. Hope To get on a few runs and shows this year and have a trouble free motoring time too lol. Thanks for readingForgot to mention for banter I fitted a throttle controller today. Nice and easy install and sharpened the throttle response it seems.

had knocking over last little while, thought no, not banana arms etc etc etc went to change lower control arms as MOT man advised bush was gone in lower arm, thought, '65k may as well do banana arms too' only seen how bad the joints where when they came off. looked and tested fine on ramps etc

Very sad..... all we can hope is that their parts helped others live on .... and as more die our decent ones rise in value

I’ll have that! Ship ok to Northern Ireland? Royal Mail postage is still United Kingdom thanks

lol exactly. Buy for 4K ish, take wheels, stick on oem wheels, sell for 3k perhaps. cheep lmgt4’s lol

maybe the plan is to break it? Wheels worth 2.5k all day going by current prices?

Looks so promising. What way are you thinking of engine management/fueling?

I miss Sunny days and drives! can’t wait for car meets to start again.

ohhh I recognise that car in the background of this forum lol....

If possible can you confirm, would this be a worthwhile mod on a Rev up? map wouldn’t be for a while down the line as it’s near impossible to get someone who can tune one in Northern Ireland. thanks

Review left

Amazing level of work there. Well done. Have you an insta or anything to follow?

Got mine today also. Thanks for organising. pleasant surprise when opening February lol

Nice little dry morning earlier this week near my house

see that's why I wondered if the oem spoiler holes should have been sealed?

Hi guys so last June I had a @Tarmac@TarmacSportz rivet-less ducktail fitted by a body shop they also smoothed and painted my front bumper. finish and match of Bumper is perfect. Spoiler was also great until maybe September. Then small blister/bubbles started to appear. photos below : please note this photo was September. There are many more now. I though they could be air filled, from maybe pours in the fibreglass. They where inspected by painter today and when we pierced one it was full of water. when we fitted Spoiler afaik It was correctly primed etc etc the original spoiler holes Where Left unsealed under the new ducktail to allow air movement etc. help guys.... it’s getting sorted next month but at a loss of what could have caused it? could damp air from car sitting have gotten up under the spoiler through the original spoiler holes and dampened it from below etc ?? really need forums help on this one lol

1. Stutopia x2 2. Kev T 3. Jack94 4. Harrison140 5. davey83 6. StormtrooperZ 7. andy James x1 8. Andy_Muxlow x1 9. zzIncubus x1 10. ILikeDolphins 11. NeeZ 12. Ricochet 13. Grumpyoldjanner 14. Flashback x1 15 glrnet 16. Paul K 17. Woodzman 18. MBS x2 19. Lyndzzz 20. da.murf

Wow missed this just sent my entries in there