-Bradders-

http://www.ebay.co.uk/itm/250905081899?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

guys this is no longer a group buy, just pm me with your requirements, your address and then send monies to b-robinson@hotmail.co.uk gift or cover the fees. for example: 350z Brembo Red Send to: Yourname Our house In the middle of the street Ourhouse 123 ABC Costing at the moment is £65 for a set of brakes delivered, £25 for a clutch line, or £80 for the pair delivered. Thanks.

Heres what i just bought, and they look good: http://www.ebay.co.uk/itm/350711415067?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

You breaking the rest of the car? you selling the air duct at the front?

i did a similar thing yesterday, sliced my thumb, right across the bend so it opens every time i clench my fist, blood everywhere but being a man lol i just sellotaped it a bit and carried on

thanks! When i get the caliper back from the machine shop, they'll let me know how many i need haha!

I'm ok for getting it out, that's not a problem, anyone have a link to new ones lol?

I got told one was fine amd it seeems ok for now!

Look for kinetix on ebay. I paid 123 quid for front discs with pads delivered

Only took me 5 minutes to break lol they was all ready to go back on until i tried to take the nipple to to cleam the paint off id got on it and it snapped lol

Ok so its all sorted. Drilled and helicoiled but now.... Fml. Bleed nipple has snapped on the other caliper loool. Im not even mad anymore its beyond worth stressing about. Any tips? Do i need to drill it out again? All the others seemed ok except this one and one other which hasnt snapped... Yet lol

Absolute bargain!! Too cheap if you ask me! I got quoted ghe cheapest 350 for a pair!

Saw that earlier, some of it is scary though lol how did all the passports come out mint and in tact?

I've taken mine off 4-5 times now and never had to touch the tension bar?

6 bolts, 2 nuts this^ Lol and yeah i didnt do anything with the tensioner bit!

this ^

Public transport during the week, Zed whenever i want, mrs tigra when i cant be bothered to walk 3 roads to the garage to get the zed out

Use a small flat head screwdriver to undo the little black plastic clips holding the cables in place, then unbolt the 8 bolts. easy peasy lemon sherbert. lol

I got my HEL braided lines for £65 delivered from HEL themselves, can get you a set if you like?

For everyone moaning about the brembo lol... Tada: Also cleaned up the rear arches whilst taking the brakes off came up like new!: Not bad for 10 years old!

Yeah they guy who im giving it to said he going to try helicoil it! cheers!

!

Right so after being a total cockend. I removed the passenger side piece of cake, as some of you know i'm currently changing my brakes. Well so i start the drivers side, stuggle a bit with the brake line, but after a bit of aircraft strength wd40 stuff, it came off, so i take the top bolt off, thats fine, bottom one the linkage arm is in the way, so i get the spanner on it, not taking note as to which way i was turning it, it was a little stiff, so i call dad over (big lad) and say dad kick this lol... dad sure enough kicks it good and boom, off snaps the head. was tightening it not loosening it. rooky mistake lol. was so pi**ed off as i can happily turbo a honda, but cant take a friggin bolt off a caliper!!!!!! Grrrrr Anyway, its fine, take a breath, look at the situation... just needs drilling out its fine. Anyway, crack on drilling it, notice the last guy we lent the drill bits too has demolished them. so its taking ages to do, dad being pi**ed off that someones ruined his drill bits starts wiggling the drill all over the shot, not realising he's now gone out the thread lol... garage next door owner turns up, he's got some new drill bits, sweeet, gives it to dad, wooosh, its through in no time... hold it up.. its gone through at like a 15 degree angle lol, now the hole is about 2mm bigger and at a dodgy angle, no idea how to fix that although i have a friend taking it away for me tonight to look at it.. So in the mean time, sorry for the comedy story.. but i may need a rear caliper very soon. Anyone got one lol? cheap as poss i'll know by tomorrow if i need it 100% Or does anyone know someone who could possibly ally weld it and re drill and tap? Thanks in advance.. doh.

I'm still trying to find time to get mine down to him!! keep seeing great stuff about him!