Jump to content

headrush

Members
  • Posts

    68
  • Joined

  • Last visited

Everything posted by headrush

  1. Resin is the best. if you acid etch to clean dust off then paint you will never have to do it again, mines been down for 30years and still looks good, did my sons 4 years ago and still looks like new, it is as hard as nails after a week.
  2. Tom, had mine on the car now for 3 years, use the car for mainly track days but do use on road, on track i set at 25 clicks on adjusters and find this a good setting, on the road i turn down to 5 clicks and this then is as close to the standard setting i think you will get and its a good ride.
  3. What are the benifits over the plenum spacer ? what sort of bhp would it give ?
  4. Have a pair fronts with MPSS on loads of tread if your interested.
  5. judging, you doing GP circuit on 17th, 6pm to 8.0?
  6. Going Spa 16th May, Nurbergring 17th, Zolder 18th.
  7. headrush

    Wanted! RAYS!

    Have a set not to bad, fronts have MPSS plenty of tread left.
  8. is that the one that is some times parked up on the wilson estate, LFE ?
  9. would like the front camber arms, live near you could pick up tomorrow, cheers.
  10. yes well worth the money, will put a smile on your face, but must do the mods first.
  11. Might be up for that as I only track mine and was going to change bushes, what is your time scale?
  12. I run ebc turbo gold for track with no problems and have used the DS 3000 on a evo but got pi**ed of with the squeak/ whistle on normal road so for the Z changed to Cosworth track masters great on track good from cold and no squeal, I personally rate these better than the DS2500 and 3000 pads
  13. headrush

    Recommendations

    Have a pair of Falkens 453 front tyres only 900miles from new, pm me if interested.
  14. Adam my Falkens are still for sale, change of plan, if you still want them.
×
×
  • Create New...