Mopedmark

along

nice one mate glad your back out here in the Z

some lovely wheels there Chris

getting on with it

along

so they all turned out well in the end good stuff

Thanks Ekona I know you don't like DRLs thanks Rich not as good as yours mate but they actually cost me ermmmmm nothing as I already had the paint and LEDs in

It's easy enough to do and it will take a first timer around an hour to remove the plenum give or take depending on confidence but just take your time

Hi Zedders, I have been pondering with DRLs for a while but a most of you know I like making my own parts if possible. Anyway these are my next little creation, I borrowed a standard set of front bumper reflectors from my old mate 14N.first job was to drill out 5 perfectly spaced out 13mm holes in each, then prep for for paint, so rub down first 600wet n dry then 1000 to smooth them out, first coat was an etch primer,then 2pack undercoat, this is followed by 3 coats of base coat (blade silver) all finished with 3 coats of clear.This was the easy bit as the 10mm led lights I used have a little black plastic socket that they fit into which in turn fit nice and snug into the 13mm holes, these little black parts are also colour coded to match. I then wired up each led to the next then put a connection clip in there so when I wired them up to the side lights I can simply unclip them to remove the bumper if needed All ready to be wired up Hope you like them They are nice and bright so in the day they will do a good job

:wave:

Looking really good mate

You will regret it

along

Charge the Zed

along

along

Personally I only use Shell V power, personal preference, this is All I have used in the past 18 months prior to thi I used BP a couple of times but only V now

Super

Looks good mate I thought hey would have removed the stipple effect of the original finish ? It is a big job to do that though, good to be different though mate

Good job mate

along there's a big Scottish contingent on here mate

along

looking good