cs2000

Aaand we have out 10th! GB is still open. Anyone who wants the modules at the GB price, message me/comment on here before they're ready to be shipped. As soon as the GB is done, modules will revert to their original pricing. 1. TubbyZ - Deposit Paid 2. Shire - Deposit Paid 3. Foo56 - Deposit Paid 4. Veeg33 - Deposit Paid 5. Getjiggy - Deposit Paid 6. Wudro - Deposit Paid 7. Hummm - Deposit Paid 8. Bullet - Deposit Paid 9. Classix 10. Andy Carfax - Deposit Paid 11. FruitPolo - Deposit Paid

Im not sure "why" it happens, but the jerkyness after remap is usually on deceleration, slow moving traffic etc, i guess its to do with the pops and bands setup as ive heard that removing this makes it smoother again.

I used to love waxybox, i found because race car box about a year ago, but i found them (and this is my gut feeling only) a poor imitation. Generally cheaper products and just didnt think it was worth it.

1. andy James + 1 PAID 2. glrnet PAID 3. Shire + 1 PAID 4. Andy_Muxlow PAID 5. Nso93-paid 6. SHEZZA PAID 7. TEEJAY +1 PAI 8. Liamm56 +1 PAID 9. cs2000 PAID

looks awesome. I have one of jacks wheel in my 350, love the feel of it.

Sadly not mate, these are 350z only. Flyboy took a lot of time to try and get these working on the 370, but it doesn't work. That said, its Christmas soon, so lets get this wrapped up as my gift to you all. I will proceed with 9 buyers. If anybody wants in on this BEFORE the module parts arrive (7-14 days likely) at the GB price, let me know. Everyone else on the list, PM's on the way. 1. TubbyZ - Deposit Paid 2. Shire - Deposit Paid 3. Foo56 4. Veeg33 - Deposit Paid 5. Getjiggy - Deposit Paid 6. Wudro - Deposit Paid 7. Hummm 8. Bullet - Deposit Paid 9. Classix 10.

Im waiting on the @andybp air ride kit personally

Hi all, quick update and we finally have good news! 1.6 arrived Friday, built over the weekend and "tested" on Monday, this all works. Its now in a post van on the way to @Kyzak to test the install. It all works on my bench, but the thing im not sure on is quite what the Bose unit will think when you unplug the tape deck and stick something else in there then press the tape button. It may completely freak out, it may just sit and wait for an input, kinda depends if theirs communication between the tape deck and the head unit (it will likely fail), however if its just passive then it should work. Fingers crossed for some updated soon

Very weird indeed, My DE works fine with both mirrors if you lock the drivers door with the key in the door barrel. I assume your central locking is working? Not sure why you wouldn't have that, its a short 12v pulse that comes down that purple wire on a lock/unlock command. Assuming its the right purple wire of course! Anyway, 1 more needed for this GB at 25% off of the usual RRP!

Hey @baileydom, I’m not too sure if anyone had fitted one, but as for some info; the module works on the on the car even if you lock the door manually with the key. The doors still lock with the central locking system so the module is still triggered. it detects a voltage change, not a resistance change (this was a question from your pm ) flr the the sake of £30, why not give it a shot and we can get this GB going!

@Keyser How much for the gearbox (assuming its all working)! Oh, and the indicator lights in the rear bumper

haha sorry, i didnt check it, There you are at number 4! One more person and we can get this deal done 1. TubbyZ 2. Shire 3. Foo56 4. Veeg33 5. Getjiggy 6. Wudro 7. Hummm 8. Bullet 9. Classix 10.

@CLASSIX is that you asking to be added to the list? If @veeg33 also confirms, then thats 10

FWIW, mine has been "jerky" since it has the UpRev map loaded onto it, ive heard the pops and bangs cause the jerkyness as a side effect

@veeg33 - You still retain full control of the mirrors with the mirror switch, so yes Thanks for everyone thats confirmed so far, 2 more and we can get this going!

One issue with ordering PCB’s from China, leadtimes! PCB version 1.0-1.3 were never actually “made” they were pure digital designs and basically verification of the size I needed along with multiple total relayouts of the board. Proof of concept essentially. 1.4 was the first board I ordered, this was via standard shipping. PCB version 1.4 was the first ‘delivered’ version and arrived a few weeks ago. I confirmed that the board was per my design, installed the voltage regulator and power indicator led aaaand, no led lit up, somehow the part in my PCB software was set up incorrectly so the + and - were swapped. Quick edit in Eagle and standard shipping reorder. 1.5 arrived Friday. I built this up and immediately checked the voltage, all my voltages were present in the correct areas so I completed the build with the Bluetooth module and tape deck connector (the led has been killed lol), all went well. However in testing the sound was... weird. Little did I know the versions of the Bluetooth chip without the onboard 12v regulator have a different pin out which just doesn’t work with the 3 wires in headphones! Grrrr I then spent around an hour sourcing a different voltage regulator and editing the PCB so it can take the 12v version of the module. New boards ordered Saturday with express shipping this time so I’m hoping this week! This all stems from the fact the for some reason the headubit itself is 12v, but the tape deck (which my module replaces entirely) is only fed with 9v and the Bluetooth module needs first 12 and it then chops this down to 3.3. Many voltages to consider. Were basically changing from 12v in the head unit, down to -> 9v to the tape deck, up to -> 12v on my board, down to-> 3.3v on the Bluetooth module, mad, but seems necessary. Anyway, I’m pretty sure that 1.6 should fix all my issues. The only unknown is the new voltage regulator as I haven’t worked with this part before, but it’s a good, known part so it should be good.

So we have some movement on the 370z front. Keyser and I have both been pretty busy so it’s taken a while, but the guide is now all done. 370z confirmed ad a go! @RDON il be sending you a message later when I’m on my pc and we can get things moving! EDIT: PM Sent just now. For everyone else teetering on the edge, I have 3 of these left all bagged up ready to go. once they're gone, they're gone (unless 10 more people want one, but that seems unlikely!)

If we can get another 4 more il order the parts in guys, thanks to all that’s committed so far!

Bump, any more interest in this?

Sounds good, il update you once I have something to share. My last batch of boards had one tiny error so I had to order some more, they're due any day now, once I have it tested and hopefully working with Kyzak then we should be good to go.

If someone sticks one of these on your car/you stick one on someones car

Yep, the procedure on a 350GT in terms of screws and how things are fixed may (will) be different, but it uses the same sensor, same ECU etc etc so it will connect exactly the same. As Mazda 3 on the other hand 100% wont respond the same way if you could even install it on there! Drop me a PM if youre interested in one I currently have 4 left and likely wont be building any more.

I cant help you with a recommendation, but ive had pretty much the same price quoted to my a reputable trader on the forum. Why oh why are rear arches not bolt in parts like the fronts! haha

Haha thanks, like the new design with some good connectors! Am pleased youre still working away on this. Following witn interest as usual At least you can spin your own boards, i dont know how, always have to order mine from the far east. One mistake on a track means a 2 week wait for new boards

Anyone teetering on the edge of wanting one of these, a winter Group Buy is now live. As mentioned in the other topic. I am creating a separate topic so i can better control the GB, theirs also less "fluff" in their so its easier for people to see whats going on!