Jump to content

BulletMagnet

Members
 View Profile  See their activity

  • Posts

    10,335

  • Joined

  • Last visited

 Content Type 

Everything posted by BulletMagnet

  1. BulletMagnet
    Where are you from, coming to a meet sometime soon?
  2. BulletMagnet
    I'll start it off then..... 1. BulletMagnet 2. BulletMagnet 3. BulletMagnet 4. BulletMagnet 5. BulletMagnet Yes...put me down for FIVE raffle tickets
  3. BulletMagnet
    Bought a sheet of 3M Di-Noc carbon vinyl for £30. Was enough to do passenger door switches, passenger door handle, driver door switches, rear strut cover and centre console.
  4. BulletMagnet
    Do you clean the inside of the windscreen too?
  5. BulletMagnet
    For average speed camera zones, I rely on the GPS Speedo on my Sat Nav.
  6. BulletMagnet
    Tried AutoGlym Glass Polish? Or claybar? Or Cillt Bang?
  7. BulletMagnet
    I'd suggest when wrapping the centre console to start from the bottom up. I did mine twice because I started top to bottom the first time
  8. BulletMagnet
    Give it a couple of hours with the centre console. You'll need to strip it out, disassemble the cubby door so you can vinyl the door cover, possibly remove the triple gauges. With Di-Noc it looks like this
  9. BulletMagnet
    Leave the hatch off and turn it into a pick-up :D
  10. BulletMagnet
    I know of some people that have had the flange removed and had a pipe section welded in it place. Seems a common point of failure on the OEM exhaust
  11. BulletMagnet

    What pressure?

    BulletMagnet replied to jim's topic in Tyres

    I just left my set of Rays at standard pressure, 35psi, and layed them in a stack with carpet under the bottom one and then a sheet of cardboard between each one to avoid developing flatspots if stored upright.
  12. BulletMagnet
    Nice pics, can't beat early Here's me being early at Bluewater Shopping Centre
  13. BulletMagnet
    Use a 1 ton bearing compressor? (Actually don't do that )
  14. BulletMagnet
    Looks similar to the F900BT I have in mine and if it's virtually the same, then I cannot fault it. SatNav has never taken me down a wrong path and the other features work flawlessly too.
  15. BulletMagnet
    I sprayed the Popcharger bracket black...does that count?
  16. BulletMagnet
    Little bit of Engine Dress-Up, thanks to Sarah (Chilli Red) for supplying. Hope you like Before: OEM Nissan blandness After: Chilli Red non-OEM goodness
  17. BulletMagnet
    I remember seeing this on eBay before with the same pic, going for mega cheap, which raises my suspicion that it may be a replica and that fitment may not be ideal. But yes, Ian is right, looks like a Varis Arising Rear bumper
  18. BulletMagnet
    Dunno whats worse, the wheels or the "model"
  19. BulletMagnet
    Remember the old "ANUS Laptops" one from a couple of years back? http://www.thescambaiter.com/forum/showthread.php?t=109
  20. BulletMagnet
    When do we pay Beavis? And where do we send the funds?
  21. BulletMagnet
    SunSeeker owners across the world should be happy to know that we use our quayside cranes to lift their boats
  22. BulletMagnet
    Had a similar prob like that before and rechecked if the BT mudule was properly seated in the cradle. Turned out it wasn't in all the way and after I made sure it was properly sat in the cradle, there were no probs after.
  23. BulletMagnet
  24. BulletMagnet
    Sadly the diffuser would clash with my rear spats GLWTS
  25. BulletMagnet
    Maybe keeping more distance to the car in front perhaps?
×
×
  • Create New...