evest

Out of interest - what mileage are you on mate?

For what it's worth, I'm approaching 145,000 miles and had no major issues mate.

Very cool mate! Good work. What's next on he list?

Nice one mate, I'm booked in end of Oct. Looking forward to it! 😆

Good spec and he's clearly put a lot of work into it... but £1000 deposit to start it and prove you have funds?? Do I have to wear a suit and book an appointment with his outer office too? Yeah we all hate time wasters but it's not an 'effing Veyron!

I did this repair to my bumper where the tab were knackered:

http://www.350z-uk.com/topic/107117-diy-bumperundertray-repair/

But where the subframe captive nuts have sheared off, I've used tie-wraps for now

So infuriating. My passenger door is full of little debts from careless morons. Sadly it's rare thing for people to even apologise these days, let alone offer to pay for repairs...

I'd only watch if "you're fired" meant that the truly awful people on it actually got shot in the face. That's entertainment!

Nah - looks like a standard import that has just had the body kit and been badged up. I think the proper NISMO versions came out later and had uprated suspension, etc...

Looking good! Might check them out too - I live down the road in Henlow mate! Need a front end re-spray.

Nice exhaust plan! You probably won't hear the intake though!

If your fuel dampener is faulty, i noticed there is one for sale over on the trading post post...

http://www.350z-uk.com/topic/103679-fuel-dampers-fuel-rail/

Ah sorry - been sold! But the thread did mention about the ticking sound.

If you're on high mileage then it possible that the timing chain tensioners have extended far enough to cause a noise/knocking whilst idling. I think a few folks have now gotten to the point of replacing the chain.

Not sure what what to advise on the fuel dampener though.

It is if you have an aftermarket style intake! Otherwise sounds like air escaping from somewhere as it's being sucked in, and the clicking noise is probably air escaping in time with the engine turning over. Could be the gasket between the upper and lower plenum. Check all your hoses and jubilee clips and see if you can track down the clicking noise

Could be a dicky gasket then, but unlijely and wouldn't think you'd hear from above the engine bay. Are you able to pinpoint the source?

I've actially gone back to the stock airbox mate - best for performance.

Some CAI might get a marginal improvement at the very top end but not sure.

Sounds like an air leak to me. Have tou had any work done or had the plenum off? Pass some tissue around seals near the sound to see if catches any escaping air.

Very unlikely mate but you could disconnect the battery as a precaution. I've had my steering wheel on/off a few times with no issues.

"Testing the brakes..." Love that one.

"Oh really, because it sounded more like you were testing the accelerator"

Ah - here you go mate:

http://www.350z-uk.com/topic/32500-how-to-remove-the-steering-wheel/

Best to have the steering wheel dead centre prior to removal!

PM me you're email address mate and I'll send you some info (might be Sunday/Monday before I can sort it). Don't worry about taking the steering wheel off - it's very easy as long as you have the torx security bit and basic sockets/screwdriver.

I've done this mate. I believe wrapping it can be done with them in place but I don't have the skills or tools for that! I don't think you can pry them off - can't quite remember but I believe they are screwed in from behind. Personally I took the whole steering wheel off and dismantled it - worth it though as it is much easier to then get the wrapping right. Just make sure you put it back on straight!

It's pretty straightforward to remove the steering but you will need a security torx bit to remove it - I can check the size later but you can get a little set from screwfix for about £5.00.

The zed ain't exactly the easiest car to use at a drive-though, I can never reach the feckin' service window.

Not that I frequently chow at McDonald's or anything...

FFS... I've just has MPSS fitted all round. So I'm now only going to read evidence that states they are the best - anything else is incorrect!! :lol:

I fitted Whiteline mate - did not touch the subframe.

I did round off the nut inside the bushing though, before dropping the diff! That was interesting...