Daryl

One would be permanent live and the other would be for the ignition so it only turns on when the car is running. Putting them into 1 can save the hassle of the permanent live and draining the battery So shall i just try each one and see which one is just for the ignition?

Any idea why i have 2 cables going into one for the battery?

Cool, thanks. It dont look like its been connected to anything, previously, but dont know for sure.

Yes it is a double Din, sorry should have said that. The yellow and black small cable is labelled Mute, and the thicker one at that end says Battery, but then it has another cable sprouting from that too. Any ideas on the purple one towards the bottom with a bullet connector on it? Think il have to have a stab and hope that I dont blow anything up/melt anything or throw my toys out the pram. So anyone fancy a beer round mine..... Thanks for your help Grundy, you have already been more help than the person who's car it actually came out of.

Am i going to offer sexual favours or something to get some help?

I know that the wires that are currently plugged into the main loom are for the speakers, but iv got some that I have no idea where they are meant to go. Iv got the steering wheel loom, which is fine, and the little one on the top right is for the BT, but where am I meant to put the yellow and black cables, and what is the extra blue cable for, as it has a bullet connector on it.

Yeah thats not the problem though. Iv fitted a fair few HU in my time, but this has loads of unlabelled wires and as it was previously fitted to a car, has some connectors on there that dont appear to go anywhere.

You are alot closer.....

Well after some ignored PM's from the original 'famous' owner of a sterio I bought on the forum from another member, I was wondering if anyone wanted to help me fit the mass of wires iv got that are meant to resemble a sterio. Iv looked at the super guide on here, and that helps a little, but still very nervous about getting stuck in with it. Does it get easier when you can see all the cables behind the dash? Happy to supply food, donuts, or anything else required to anyone that wants to help out. I live in Milton Keynes but will travel if that helps. I think i can fit the reversing camera and the mic for the phone, but its just the wiring up that baffles me. Any help is appreciated.

We are letting the other teams get a head start today, the track is still abit green........

Seriously,what gear knob you got,and is it for sale?

Renault apparently have 'fixed' their issues for the power unit! Guess we will see next week.

What knob you got, looks a nice size

Had to get one of my front windows done, and it cost me £40.

BUMP

BUMP

BUMP

Just to point out, these are £18 each from Nissan.

Thanks for the comments. Iv seen these for sale for up to £100, so I thought £80 posted was a good deal to be honest

Fronts have 4.5+7.6mm left. Rears have 3.4+3.6mm left. Sorry, should have put that in the first post to make it easier for people

Got a pair of brand new original Nissan gaskets for the joint of the downpipes to the Cats, oem or HFC's These are not cheap, and not always that easy to get hold of. Located in Milton Keynes. £30 posted

Not much else to say really, other than its in full working order. Located in Milton Keynes. £80 posted

Iv got a full set of used 19" Falken 452's The fronts have got quite alot of tread left the rears not so much, but would do a track day at the very least. One of the rears has a 10mm wide piece missing off the very inner most area of the lip. This will not affect the fitting or stability of the tyre when mounted, but just wanted to be honest. Pictures showing the tread depth below. They are located in Milton Keynes, and happy to pack them up if the buyer wants to arrange a courier, otherwise collection please. Looking for £160 for all 4

Its deafening but glorious, shame we wont be hearing them as often as before.