R35LEE

Ye it's a 'normal' noise then Let us know what your Nissan garage say

Nor me

Ye it's a flywheel / clutch noise. Happens on one of our customer cars when they reverse down hills then press the clutch in. I wouldnt worry too much unless the noise gets worse or the gear selection issue 1st to 2nd gets worse. Go and see a decent specialist or HPC to ease your worries though as It could be a different noise

We shouldn't laugh at old Hef really though as the guy is a living legend

Nissan love confusing people with the paint colours

No I would win that! Colin would get maybe?

I was joking Ride safe

Awesome Colin Where did GUNs get Part Exchanged?

Unreal what you can do with your mams ironing board and a load of mdf

I have a uk Ballast in stock ready to rock and roll! I am guessing you didnt have an arch liner in place hence how it got so wet?

Nice looking bike mate You got a donor card?

Poor Hef at the end!

I have loads of spare looms mate in case someone has cut yours off (OBD plug). However I think it will be there somewhere so give me a call and I will talk you through what to remove. PM sent

Best of luck with that

That has put me off my lunch

Paint your old ones as every badge I have seen has end up like yours did

Hope things go better for you back at your old place

We (Falcon Performance) have a 350z Shelled waiting for a cage to go in We are planning on entering it into the Northern Sports and Saloon Championship ran by DDMC with a different engine. The plan was to sell a seat in the car to some of our customers after proving it to be competative. I would be interested in a 1 make series as long as Croft was one of the races in the Championship I watched the MX5's (only because a friend was running) last month and they were having great fun but just didn't have the sound or the power really! A 350z is a heavy lump of a car but for a 1 make series it would be perfect Min weight per vehicle and stock ecu's are the way forward and as Mark said DE engines. Oh and stock Diffs and Gearboxes too! Parts are cheap now guys for the 350z especially on the 2nd hand market with good engines costing £1,500 and suspension parts being kept on the shelf for less than half Nissan's dealer prices ARDS at Croft circuit are very reasonable as we have put a few of our customers through them

I couldn't believe the call when you said your brother engine blew up too in the same week Will you give me a call tonight on this 2nd engine mate

This issue can be sorted fairly easy from inside the cabin. The gear surround and centre console have to come out and the rubber gear gaiter unbolting (4 x 10mm bolts), then you find 3 x 10mm bolts holding the selector shaft. These need to be slackened off so the triangular metal plate can be moved left slightly to stop you overshooting and going too far to the right when trying to get 6th. Go and see Nissan and get it done on warranty.

Think he needs to book it in with you boys Mark

He says 5 of the 6 are below 140 mate

Could be repaired but remember Rays are forged guys

Scotty, go and give it a thrash with the 'S' mode off and see if it helps. The gears can feel a little notchy but never had a real problem selecting a gear. Think a Nissan HPC may be best mate but make sure you take someone out in the car and have them acknowledge there is an issue as some places will just give you it back and say no issue upon testing. Let us know how you get on