andlid

class way of giving a pressie

would you please start with white and see what it looks like? (you need a base colour anyway) snap some photos and see what it looks like? I'll stop talking to you if you paint them pink...

viewtopic.php?f=21&t=42576&hilit=custom+exhaust+lexx call them lads...

in a biker community that behaviour would be followed with a rideout to where the hang...

white looks the part on that car mate

See, i'm just wondering whether he could pebbledash them. That way when you hit the gravel trap, nobody will know

trackwheels = white

missed them! looks like something I want alight...

The round holes? I was thinking those little small rectangular holes just above the splitter with a hose going up from them can you paintshop that and show me what you're on about?

that is an idea, something pretty flat but wide and then go into a 'hose' like connection on the back and have a pipe against the cooler. hunt goes on. Isn't that what the strosek has? that has honda vtec type holes at the sides for the center of the bumper, was thinking something like 50mm but 150-200mm wide that can be fitted under the bumper with a hose to the cooler. Might not be needed though, will monitor heat first I think. Good with a backup plan though.

I know someone that would be interested in that mate

looks to much race to me, this needs to be a sleeper

liking that first link, thanks for that one. looks good but would need to respray and do body work, quick hole in the bumper would be an easy job for me to do myself. could do that but the one for the airfilter woudn't actually be doing anything, the filters will sit on either of the side down at the top of the bumper. Won't be getting to cold I'd say, will only engage once it reaches certain temp (supossedly) no room... mmm looking at some of them now. that is an idea, something pretty flat but wide and then go into a 'hose' like connection on the back and have a pipe against the cooler. hunt goes on.

Have yet to test mine out :-(

I'm thinking on making a hole in my bumper (see attached image below) where the red circle is. What would you recommend to stick there? Need to g et some airflow to my oilcooler, bonus if it looks good. Have looked at the 4-6 holes drilled option but would rather have a horn/type though.

then get someone fitting them? got my fitting for 80€, then only need to get tracking done for another 60€

now she looks like this

can't wait to check mine out

tradition, I smell fish..

sounds like a pr stunt to me... American spy: Lets come out with that we killed Usama and maybe he'll make an apperiance that he's not dead and then we'll strike for real? American spy boss: How will we make sure that we don't have proof of his death? American spy: Will bury him at see... American spy boss: Sweet lets go for it. News then broadcast this: WASHINGTON – A U.S. official says Osama bin Laden has been buried at sea. After bin Laden was killed in a raid by U.S. forces in Pakistan, senior administration officials said the body would be handled according to Islamic practice and tradition. That practice calls for the body to be buried within 24 hours, the official said. Finding a country willing to accept the remains of the world's most wanted terrorist would have been difficult, the official said. So the U.S. decided to bury him at sea. The official, who spoke Monday on condition of anonymity to discuss sensitive national security matters, did not immediately say where that occurred. convenient...

yes there is a clear vinyl, but not sure if i can get it with the air release technology. will have to find out. air release what for something? can you not use the standard heatgun technology?

you did some screeching then I take it!!!

bump anyone? my humble guess is that the cables behave the same way but the connectors has been replaced...