Jump to content

Recommended Posts

Posted

can anybody let me know where I can get a sat nav that fits directly into the small top glove box in a 2005 350z.

I know I will have to remove lid, thanks B)

Posted (edited)

Do you mean an integrated unit or something you can remove?

 

I have a TomTom Start25 that, with a little bit of surgery to the cubby floor fits. You can see it on my build thread here ...

 

http://www.350z-uk.c...re-strut-brace/

 

The cubby lid is still fully functional and this particular TomTom model has a "start up when power on" feature (not all of them do) so when I turn on the ignition, the unit powers up automatically and powers down when I turn the ingition off.

 

David

Edited by Tinyflier
Posted

I had a navman s70 in mine which fitted without any surgery- apart from a small hole at the bottom for the wire. It just wedged in perfectly so I could remove it to update it etc

 

It was wired directly to the battery. Only issue was it would get hot on a long journey so the cubby lid had to stay open. Quite an old unit now but it looked neat. Pic in this thread

 

http://www.350z-uk.com/topic/22200-navigation-wanted/

  • 2 weeks later...
Posted
HR rather bthan DE, but a 7" Phablet fits fine and can run satnav and much more

20140504_170059.jpg

20140504_170131.jpg

20140504_175125_1.jpg

 

Nice neat job :thumbs:

 

I take it that it's set to wake with ignition so no need for wiring in buttons etc

Yes, its wired in taking power with ignition.

Using E-robot to detect power state change. Turns all services on with power and launches satnav as standard. Power off switches off WiFi/GPS/Bluetooth, switches off screen and puts tablet into deep sleep. Get about 10days in deepsleep before battery drains.

I have a charge point for it behind the gearstick, so easy to charge with an external battery when that happens.

I fitted the tablet upside down so the power buttons can be found by removing the OEM satnav controls.

 

A little video

 

 

Posted

Very neat mate, I wouldn't be bothered about anything but satnav really.

 

Can you not hardwire the power?

 

 

Sent from the golf club...

 

Read a few posts with people doing that. I was nervous that the 12v converter would get too hot and the tablet itself.

I use the car each day, so little chance of the battery draining. Takes about 5seconds to power on, enable GPS, lock to satellites and load Sygic satnav. Happy with that

 

I also have this with an OBD2 unit. Looks great

http://www.appszoom.com/android_applications/tools/acarputer-gps-obd_clwfg.html

 

Posted

Very neat mate, I wouldn't be bothered about anything but satnav really.

 

Can you not hardwire the power?

 

 

Sent from the golf club...

 

Read a few posts with people doing that. I was nervous that the 12v converter would get too hot and the tablet itself.

I use the car each day, so little chance of the battery draining. Takes about 5seconds to power on, enable GPS, lock to satellites and load Sygic satnav. Happy with that

 

I also have this with an OBD2 unit. Looks great

http://www.appszoom.com/android_applications/tools/acarputer-gps-obd_clwfg.html

 

Well it's really easy, you can take a feed from the passenger footwell cig lighter, a decent 12v adapter shouldn't get too hot either, but like you say no big deal :)

  • 2 weeks later...
Posted

got a 5 inch sat nav garmin,fitted nicely,no major cut outs,wired into same

loop as power socket.

 

glove box lid acts as sun visor.

 

well chuffed :teeth:

 

.

  • Like 1
Posted

Do you mean an integrated unit or something you can remove?

 

I have a TomTom Start25 that, with a little bit of surgery to the cubby floor fits. You can see it on my build thread here ...

 

http://www.350z-uk.c...re-strut-brace/

 

The cubby lid is still fully functional and this particular TomTom model has a "start up when power on" feature (not all of them do) so when I turn on the ignition, the unit powers up automatically and powers down when I turn the ingition off.

 

David

 

Nice install ! , without sounding retarded , do you have any signal issues with it hiding in the cubby v stuck to windscreen ?

Posted

Do you mean an integrated unit or something you can remove?

 

I have a TomTom Start25 that, with a little bit of surgery to the cubby floor fits. You can see it on my build thread here ...

 

http://www.350z-uk.c...re-strut-brace/

 

The cubby lid is still fully functional and this particular TomTom model has a "start up when power on" feature (not all of them do) so when I turn on the ignition, the unit powers up automatically and powers down when I turn the ingition off.

 

David

 

Nice install ! , without sounding retarded , do you have any signal issues with it hiding in the cubby v stuck to windscreen ?

 

I had a nav fixed permanently in the cubby and never had any signal issues :thumbs:

  • Like 1
Posted

thanks lads ,I just put in a 5 inch sat nav,no surgery,wired into power output socket.

it was a garmin,lid shuts fine and acts as sun visor.

 

happy,no over heating :teeth: :teeth:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...