Beavis Posted April 15, 2013 Posted April 15, 2013 Having purchased a second hand Nismo titanium shift knob from a forum member it soon became clear I was not happy with the rubber finisher that is supplied, for some reason it had started to degrade rapidly! So an alternative was machined at work at out black nylon on the left........much better! If you ask me nicely and you need one I will get one machined for you. 1 Quote
14N Posted April 15, 2013 Posted April 15, 2013 Although I haven't got a Nismo knob, I think this my suit my new one quite nicely. Have you got any pics of it fitted Cornholio, I mean Beavis? 1 Quote
14N Posted April 15, 2013 Posted April 15, 2013 Ooooh, nice. I'll check my knob later to see if there's room for a finisher. Thanks Beavis Quote
jjt Posted April 15, 2013 Posted April 15, 2013 Same shifter as you, I didn't get any rubber for my knob If you would be kind enough to fabricate one and bring it to Wales I would be most grateful Quote
Beavis Posted April 15, 2013 Author Posted April 15, 2013 Same shifter as you, I didn't get any rubber for my knob If you would be kind enough to fabricate one and bring it to Wales I would be most grateful No problem will bring some with me. Quote
Ceejay29 Posted April 15, 2013 Posted April 15, 2013 I have the Nismo carbon shifter, it is lovely, but extremely small! I bought it second hand at a very good price and in excellent condition, it also came with the rubber finisher you mention above....although with it fitted I cannot thread the knob down far enough and it spins when you grip it. It seems like the rubber finisher is too large, or I have a short shifter? Has anybody else experienced something similar? The interim remedy I have fitted instead is a rubber grommet/washer thing left lying around the workshop, which allows me to screw it on further. I may also use lock tight if the problem persists but would rather fit the proper parts. I will take a photograph at the next opportunity Quote
jjt Posted April 15, 2013 Posted April 15, 2013 Same shifter as you, I didn't get any rubber for my knob If you would be kind enough to fabricate one and bring it to Wales I would be most grateful No problem will bring some with me. Cheers Beavis, top man Quote
spursmaddave Posted April 15, 2013 Posted April 15, 2013 Do you think you could do something with my knob Dave Quote
Beavis Posted April 15, 2013 Author Posted April 15, 2013 Do you think you could do something with my knob Dave I will tell you my room number when I get to Wales Quote
choptop Posted April 15, 2013 Posted April 15, 2013 (edited) Do you think you could do something with my knob Dave I will tell you my room number when I get to Wales Do you think you could do something with my knob Dave I will tell you my room number when I get to Wales It was only a question of time before this thread headed downhill Edited April 15, 2013 by choptop Quote
Beavis Posted April 18, 2013 Author Posted April 18, 2013 Nuts If you send me a drawing of what you actually want, i will see what i can do. Quote
14N Posted April 18, 2013 Posted April 18, 2013 If you send me a drawing of what you actually want, i will see what i can do. Cheers. Took a good look at my knob after looking at your rubber (oh c'mon) and it's a very similar design to the Nismo one, but I don't think I'll need the finisher - it kinda looks OK without it. Thanks again tho bud Quote
twobears Posted April 18, 2013 Posted April 18, 2013 I am sure that when I first joined the forum I got into trouble rather quickly for asking to see everyone's knobs. Still don't know why that was? Quote
stuarty Posted April 18, 2013 Posted April 18, 2013 Glad your knobs looking a lot better, nothing worse than a scabby knob! Quote
maddog1982 Posted November 18, 2013 Posted November 18, 2013 Massive thanks to Dave! I bought a Nismo Knob off the board but it was missing the finisher (later found out only the specific part numbers for the 350 include this) I PMed Dave (Beavis) and he offered to send me one out free of charge! This has well and truly saved me as I couldn't find one at all! I had to ever so slightly open this one up with a drill but once I had done that it fitted perfect! Top man! Thanks again 1 Quote
Beavis Posted November 18, 2013 Author Posted November 18, 2013 Massive thanks to Dave! I bought a Nismo Knob off the board but it was missing the finisher (later found out only the specific part numbers for the 350 include this) I PMed Dave (Beavis) and he offered to send me one out free of charge! This has well and truly saved me as I couldn't find one at all! I had to ever so slightly open this one up with a drill but once I had done that it fitted perfect! Top man! Thanks again Glad to have been of service Matt. And thanks for the donation to the forum 1 Quote
SHEZZA Posted February 1, 2015 Posted February 1, 2015 (edited) Bit of a thread revival, recently bought a nismo knob and It came without the finisher, after a bit of searching came across this thread. Got in touch with Dave who just happens to live in the same town. He had a look to see if he had one, he didn't so machined one for me at work. I popped over today to collect and also so he could have a listen to my Hfc's as he has some sat in his boot ready to go on to his immaculate yellow GT4 which was sat on the drive way looking as new ! Thanks Dave, nice meeting you today. Edited February 1, 2015 by SHEZZA 1 Quote
SHEZZA Posted February 1, 2015 Posted February 1, 2015 (edited) Dave's car always looks like that I had a funny feeling it would be. Top man Dave, did it all for nothing so Ive hit the donate button. Edited February 1, 2015 by SHEZZA Quote
Beavis Posted February 2, 2015 Author Posted February 2, 2015 No problem Mark, more than happy to help any member who wants help with finishing his Knob off!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.