maddog1982

Lovely lovely bike pal. I am after the street triple R. I currently have a 09 FZ1 with loads of add ons which I love.

Pete at Demon Performance in Crewe is one of the best places you could speak to. People travel from one end of the country to see him/

Lovey car, I've owned both a MK2 ST and a 350DE revup. Put a stage 1 Revo map, intercooler and RS plugs and it was much faster than a stock 350, bonkers fast but found on a rack at more than 110 the ST felt unsettled where as the 350 felt planted at any speed.

I loved MPSS so much on my zed I have just bought four for my mark 6 diesel golf. Haven't fount a tyre that even comes close to these.

Many thanks on the kind words Matt. It was a pleasure to meet and do the deal with you.

Sold :byebye: :byebye: :byebye:

It is with a heavy heart that I now offer my 350z up for sale. I have owned this for two years and loved every minute of it! I purchased this off a doctor who had her from 9 months old! It has the most comprehensive service history I have ever come across. There is a receipt for everything the car has ever had. The service book is also fully stamped, most of which is Nissan. In my time I have had her serviced twice by specialist garages, again this is shown in the book and with receipts. In Summary. 2007 56 plate 350z GT with Nav (I have purchased the latest DVD disk) 296hp RevUp Gun metal grey 59 and something thousand miles. MOT until Dec 15. Full alignment done at ABP when I purchased the car. All 4 wheels striped and powedered coated and the rear tyres replaced with MPSS (Sept 2013) Full cobra resonated cat back exhaust fitted @ 5482 miles (july 2014) Standard rear pads fitted @ 54810 miles (Sept 2014) Ferodo DS2500 front pads fitted @56005 miles (Jan 2015) Full replacement clutch, flywheel and slave cylinder with a braided hose fitted @56799 miles (Jan 2015). Last service was a P2 carried o@ 58916 miles, including replacement brake fluid and was properly bled through (I watched them do this) (May 2015) The only part that lets the car down is the front bumper. It suffers from stone chips. However, this its booked in for a full respray Thur 16th July. The car is snow foamed weekly and then washed by hand. It also has been professionally valeted twice yearly in my ownership. The paint work comes up like glass when washing it. Anyway here are some pictures, It is now back on the original registration. I will go get a few pictures of the rear and the inside/ £9250 ONO located in Sandbach, Cheshire. Matt **edit phone number removed as this is open/public forum - Neo **

Hi Guys, well tomorrow is my last day! I would like to complete the studying Windows 7 Enterprise Desktop Technician Course with the aim to taking exam 70-685. Can anyone recommend any good training companies? I've looked and looked and every site I come across doesn't fill me with confidence!

I've just had a look at a few posts and it looks like a nice example. Let me know when you put it up although I'm keeping an eye on the 'for sale' section anyway. Sent from my iPhone using Tapatalk Thank you that's much appreciated. Its a great example with so much history. Recent clutch change also!

Mine will be up for sale shortly

Firstly, wow! Thank you so much for such a great post. I have never used a Linux gui i my life! It is all Centos here and command line. Your post is really helpful. I will read up on the ITIL and mark it on my CV. There seems to be quite a lot of first/second line support work going in my area, more that I thought to be honest. I haven't looked for anything Linux based though.

No mention of training, however, I have had a good pay out so dont mind using some of that to train

Im in Sandbach, Cheshire - the north west

This is £295 : http://www.reed.co.uk/courses/microsoft-windows-7-enterprise-desktop-support-technician/25287

Really appreciate the help! The course you linked to isn't long and this is something I could complete in a few days. Any recommended online training providers? Does anyone rate the comptia qualifications?

I did come across that earlier and wondered if I should do that. I wanst sure with it being windows 7 though if it was out dated now and replaced with something newer.

Thanks Hadyn! I currently work for a small telecoms company - I have experience in both windows and linux systems. The support experience I have are for all the telecoms switches/hardware and being on call in case these broke down in the night, its quite bespoke to the company I hence why i am a little nervous going in at the deep end. I have no problems with taking any course that is offered to me. Ive seen companies asking candidates to be ITIL qualified and sometimes MCP.

Hey guys, I've just taken voluntary redundancy from a company I've been working for, for ten years! I've qualifications in IT and done a support role for the company I am leaving but moved roles to become the customer services manager for them a few years back. I am wanting to get back in the IT field again. Looking for advice on qualifications, is there anything I could do to bring my knowledge back up to date/fill in the gaps from being away from it? Ive looked at Microsoft and comptia so far. Or do you think it would be better taking a lower paid job in the field and training with the company rather than go in to high and be out of my depth? Cheers! A confused and slightly scared Maddog!

Did anything ever come of this?

Yes, I was in the Grey 350Z roadster . The Ginger Roadster was 10 or so cars in front of me at the time...I don't really understand how it was one car behind me when I reached Winsford Pete That's right it was a ginger roaster. Were you in convoy? I rarely see another 350 or 370 on the road, to see 3 in one day is a little strange. Oh nd first time I have been spotted by another member on here! I regularly use that road as my girlfriend lives in Wales. Seems to attract a lot of speed vans too :-(

That would of been me!!! I saw a 350 convertible on that road then a few cars behind a 370 that flashed and waved at me . About 20 mins before that I let out a blue 350 convertible right near the fishpool pub. Never seen so many in one day.

But how much did the oil, filter and sump plug cost you on top of that? What you mean is, you've just £48 for a P1 service labour. Ha yes this is true! The bits cost me £40.

Yup I know, but I couldn't be bothered and dont have a low jack etc. Stayed with the car and they really did check everything out while the oil was draining.

Ive just paid £48 for a P1 service supplying my own oil, filter and sump plug

Any updates? its been 17 days for me and heard nothing