jjt Posted June 13, 2012 Posted June 13, 2012 As per the thread title... anyone had success with this? I was sitting in traffic today and thought "How hard could it be??" Quote
Greddy-Matt Posted June 13, 2012 Posted June 13, 2012 Funny you should say that it's next on my "to do" list, bit of mdf, jig saw and some covering, can't be all that hard. Quote
buster Posted June 13, 2012 Posted June 13, 2012 i ve had a template sat in my garage for about a year now.....this maybe be the push i need to get it under way Quote
Andy75 Posted June 14, 2012 Posted June 14, 2012 Well I'm bored with mine getting in the way of stuff I want to put in the boot - afaik it's an original one as it has oem looking brackets holding it in. Have a look on Saturday if you want Buster? Quote
14N Posted June 14, 2012 Posted June 14, 2012 I know it’s not the same, but the principle idea for fabrication would be similar…. I made a rear seat delete kit for my TT. I used cardboard to mock up a template and then used some MDF as Matt says. Just keep cutting the cardboard till you get it right. I then covered it with acoustic carpet (readily available on eBay). Whole lot cost me about 20 quid. Audi want over £1000 for their version!! Thankfully it highlighted that I really didn’t need rear seats and I ended up buying a proper car… Quote
buster Posted June 14, 2012 Posted June 14, 2012 Well I'm bored with mine getting in the way of stuff I want to put in the boot - afaik it's an original one as it has oem looking brackets holding it in. Have a look on Saturday if you want Buster? will do....always one of the items i wish mine had come with. Quote
evilscorp Posted June 14, 2012 Posted June 14, 2012 mine came with one but it was deamed excess weight and now gathers dust in garage also its purple? Quote
spursmaddave Posted June 14, 2012 Posted June 14, 2012 When i first got my zed i bought a custom made one, was a piece of crap wood in some cheap vinyl that didnt fit properly :thumbsdown: luckily i found a genuine ine for a good price :woohoo: Quote
arow Posted June 14, 2012 Posted June 14, 2012 I have a standard one, it is surprisingly heavy actually! If anyone is close I'm more than happy for someone to make a template! Would be very easy to make one! Quote
arow Posted June 16, 2012 Posted June 16, 2012 Didn't notice your location, a bit away, I'm in Preston! Quote
jjt Posted June 24, 2012 Author Posted June 24, 2012 OK, so the rain held off for a bit so finally managed to get the tonneau made. Got some good quality plywood from a local builders merchants, c.£6 for double what I actually needed. Made a template out of card then cut the plywood with a jigsaw and sanded down. Next I got some upholsterers foam off ebay for about £7 and glued on both sides with spray glue from an aerosol. I wrapped it in acoustic carpet which was had off ebay for about £6 (more than twice as much as I needed again, I wasn't too confident), using the spray glue to secure, then a staple gun around the edges (which are hidden when in place). Finished off by getting the edges sewn all around, which wasn't strictly necessary but looks really neat. Daytime pic: Nighttime pic to see if there were actually any imperfections in the fitting, which there are none Overall more than happy with the result, reduces road roar and exhaust drone massively, as well as hiding away anything in my boot. Bargain mod which looks and feels OEM. Quote
4RE Leather Posted June 25, 2012 Posted June 25, 2012 I had never even heard of them until Clown popped up with one a few weeks ago and gave it to me:) Quote
jjt Posted June 25, 2012 Author Posted June 25, 2012 Cheers guys, and it hasn't even fallen to pieces yet Quote
onthatB0MBSHELL Posted June 25, 2012 Posted June 25, 2012 Great job, some nice woodworking skills there. May be something i`ll try in the future Quote
p40ulw Posted June 26, 2012 Posted June 26, 2012 Awesome work mate! I take my hat off to you for trying it, can i ask how did you attach it when in place and did you make one for both sides of the brace? Or can you see the back of the one you have made from inside the boot? Quote
jjt Posted June 26, 2012 Author Posted June 26, 2012 Awesome work mate! I take my hat off to you for trying it, can i ask how did you attach it when in place and did you make one for both sides of the brace? Or can you see the back of the one you have made from inside the boot? Cheers, I just made sure the size was perfect, so it stays in place on its own. The carpet has a bit of give in it as well, so when its in place it takes a good whack from the boot side to get it out. Only the one side was needed, but I did all the staple gunning / stitching down the edges which aren't seen when in place, so it looks neat enough to be used either way round Quote
p40ulw Posted June 26, 2012 Posted June 26, 2012 fancy making another? i dont mind paying a charge! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.