3FIDDYZ

Isnt this a warantee swap of some discription? Comes under the 5 or 10 year anti corrision gtee? Am sure someone has had theirs done under this... Mine are starting to go too....

http://www.google.co.uk/products?q=pion ... a=N&tab=wf Do a search for pioneer or headunit on here and some info is about.. If its the SatNav one the its the AVIC. Few people have them, and the Alpine. I have the Kenwood DNX7200 (As do a few others). Great bit of kit and a worthwhile upgrade.. There has just been an upgrade on the kenwood to the 8xxx series so the 7200's will be coming down in price....

Nearly all will fit the Zed... Did you mean a single din unit or one with sat nav etc? ie a Double Din one? Its all quite tight at the back though...

Plenty of discussion on this thread on the OC http://forums.DELETED.com//ind ... opic=16098 Not that much info out there about settings though on the web... mark

Am in IT training Will have a butchers in the catalogues and emails in the office and give you a shout on Monday. Hmmm On the Job training... 5 days out the office on a dedicated course is worth a couple of months of on the job... you do the course first and then get the experience! You need both to be fair! I may even have something lying about in the office I could send you. Whos the job with?

My bad, meant the Nissan Badge as the thread was about the TK badge... After rereading the post.... Nope, its a +2.. there are no holes under the 350z badge!

http://www.pistonheads.com/news/default ... ryId=18432 $108,000 in the US £100,000 in the UK................. I am sure with an extra £45k on top of the £55k of the GTR you could get a faster laptime...

Who???

yep

Madam MartinMac has his crystal ball out!! Slam it! Or drop it a little !! Looks good though

Would still be the Nissan for me, GT-R prob wont set on fire... Anyone see the top gear review of the previous one..... JC did say that they had managed to sort the drive on the previous one... Bet he had to fill up after one lap in that beast though!! Nice engine note

Not having fitted them, but I would imagine there would be an issue due to there being no frame on the top of the door. Also door handles dont lend themselves to a lambo fitting.. But they do look cool though (IMO!) Would be cool if you used some actuators like on Pimp my Ride and they open / close at a touch of a button with a solanoid under the wing mirror....

I'd lose the 350Z badge, Mark, for the ultra clean look. Great minds think alike!! I am just waiting to get a little something to do a mod with and there will be no badges on the back... But you will be able to see the TK badge somewhere!

I suggested spacers because he was saying he wanted the Nismos. I agree with you that if looking at other wheels the offset is key and its always better to get the right offset than fudge it with spacers. On the other hand, provided you get good hubcentric spacers from someone like Eibach you should be fine. For all the old wives tales about additional wear on the wheel bearings I'm yet to actually find someone who has had a problem. Agree with Digsy said Didnt someone have issues with non hubcentric ones?

Yep they cover the holes :-) And Kev is the cheapest place for them from my research

Its not just about the wheel width, its about the offsets. If 10.5 at the rear is the wrong offset it could still sit in the wheel arch. I think the optimum offset your looking for is about a +22 Dont seem to be that many problems with spacers, but if you ca get away without using them its prob better... check out http://z-store.co.uk/index.cfm?fuseacti ... gory_id=41 as there are loads to chose from on there... Mmmmmmmm http://z-store.co.uk/product/put_pics/p ... ck_703.JPG

Enough for sale from members on this site and the other UK site (most are probably listed on both..) that have non of the above problems and have been very well looked after. You didnt say how much it was up for? And where you based?

Remove it, its just somesort of bypass you dont need! I think some people have upgraded the CAI tube though.... You can attach the ground wire under it and then keep that tube on.... You may need a longer screw due to 3 wires attaching though... Mark

open a photobucket account, upload the pics, copy the image tag, hit fast reply on here, press ctrl and v keys together, html link appears, finnish message, click submit, Done!

Did you see this when you were researching? http://my350z.com/forum/nitrous-oxide/3 ... et-up.html FTW...!

Fitting isnt that hard, we did coilovers at a recent meet. Height and setup is another thing....

Ruff Racing R278 Axis Matrix Or you could go for the daddys... The Volk GT-V or GT-M Think there are a few other companies like RacingHart that make something close

Is that delivered with Tax from Adam? If its not am thinking they could be more expensive in the end than Envys price.... Oh and you could have the Envy ones tomorrow

Just the Evolves in 19's.... They have some nice wheels and at a good price too... Shame as 19" fit the best....

http://www.350z-uk.com/forum/viewtopic.php?t=14849 Bite his hand off!