antnee

How have they come off a brand new car? The wheels were changed for 18MY?

Welcome, what are the specs of the car?

Mats and net sold Mods, please close topic

Starter button Sold

Starter button still available. Mirror is now unavailable. Net is from an R56 Mini I think

Mats and net reserved for Umster. PM sent to Killick.z

Now my 370Z has gone I have a few bits available; GTR Starter Button Add a nice bit of colour to the cabin with the GTR starter button. Nice easy mod to do and looks miles better! IMG_20190225_183024425 by Anthony Molyneux, on Flickr £30 Luggage Net Net from a Mini which fits the 370Z boot really well IMG_20190225_182406678 by Anthony Molyneux, on Flickr £25 Auto-dimming rear view mirror Retro fit kit for auto-dimming rear mirror. Mirror is from a GTR, then I made up the power cable with the right connector and pins. Just needs power from the roof light (I can supply pic of what wires need tapping into). I think I have some spare scotch blocks which I will include. IMG_20190225_183006210 by Anthony Molyneux, on Flickr £50 Floor Mats Black floor mats with 370Z on them, holes for the location lugs already in the floor carpet. Some slight wear on the drivers side. IMG_20190225_182604891 by Anthony Molyneux, on Flickr IMG_20190225_183655979 by Anthony Molyneux, on Flickr £35 Postage can be arranged for any item at £5, if you buy multiple items it will reduce. You are also welcome to collect from Hinckley, Leicestershire. Payment by Paypal or bank transfer. Any questions, let me know

The dealer made an adjustment on it which has made it marginally better. I suspect the real issue is with the auto-hold, which itself is a bit iffy and only seems to work randomly.

If you do put it on the front screen, remember to run the cable the screen side of the A pillar trim

I would be interested to see how he does the flat bottom

I'm sure I have seen this issue mentioned before, but I can't find it now. The boot should completely unlatch with just one press of the switch, but I am now intermittently having to press it twice and the first press releases the boot but it is still latched. What is the supposed fix for this? My car is a 2018 model.

Its for the pop-up pedestrian safety feature. There are some pryo-technic actuators that push (and break) the hinge to lift the rear edge of the bonnet up. This gives more room for the bonnet skin to deform under a pedestrian hitting it before it contacts the engine.

I used to run one for an old club which was the same week in the month, same location every month - that way word spreads. I would be up for something, Im in Hinckley, just off the M69. I reakon something around the Tamworth area could work well, easy access from lots of major roads to include people from most of the Midlands.

Where is the info on this meet? Its not far from me

My 2018 goes DRLs to headlights. I don't know of any auto lights that use the side lights.

You should be able to just get the cover - will be a lot of £££ through Nissan though.

I found the Nismo is on the verge of being too stiff. The GT is much more compliant for day-to-day use.

I also had the bolster wear through, I took the cover off myself and a local place charged me £70 to sew in a new panel.

You may need to use a flat blade (ideally plastic to avoid marking the material) to fully push the rubber into the slot. Work all the way along the seat too. I had the same Recaros in a Clio and the sides would pop out every now and then.

Has the material come away from the rubber edging? If not, you can just put it back in by hand. the material folds over on the rubber then pushes into a slot of the hard plastic of the seat. Should take about 2 mins to sort.

If you haven't already, PM Bikeracer and bigjackb to get their reg's and nissan dealer details, send on to Nissan UK - then they can't dispute

Just checked my GT with standard leathers - after 5000 miles they are still looking fine.

I wonder if the seat supplier for the Recaro versions has switched leather suppliers recently - as it only seems to be relatively new Nismo's suffering from this issue. I'll take a look at my GT later today.

I just put clutch in and hold the button till it starts (about 1 sec or so), sometimes I release the button too quickly and it just goes to ACC

No real updates to publish, I have just been enjoying the thing. Last weekend saw it hit the 5,000 mile mark already.